Home
Главная
Stadler Form
Весы Кухонные
SFL.0011
Инструкция по эксплуатации Страница: 8

Stadler Form SFL.0011 Инструкция по эксплуатации онлайн [8/17] 175450

OPERATION

Battery installation / replacement

This scale operates with replaceable batteries.

1. Insert three 1,5 V AAA alkaline batteries in the battery compartment at

the bottom of the scale, bearing in mind the polarity indicated. At this point,

the scale emits an acoustic signal; the clock/alarm clock display shows

“0.00”, the temperature, and the room humidity percentage. To set the

clock, see paragraph “Date, time and alarm setting”.

2. When the batteries are discharged the display will show either “LO” or

the battery symbol.

Remove the batteries if the scale are not to be used for a prolonged period

of time. Always dispose of the batteries in the special containers.

Instructions for use

1. Place the scale on a at and stiff surface.

2. Press the “ON/OFF” key (TOUCH SCREEN key).

When the display shows 0 g / lb 0 : 0.0 oz, the scale is ready for weighing.

3. Perform the weighing.

4. Automatic switching-off after 1 minute, if it is not used. To extend the

battery life duration, switch off the scale by pressing the “ON/OFF” key.

TARE Function

The TARE function allows to set the scale to zero at any moment and to

weigh different ingredients without removing the ones already weighed.

1. Press the “ON/OFF” key (TOUCH SCREEN key). Wait for few seconds and

when the display shows 0 g / lb 0:0.0 oz the scale is ready for weighing.

2. Weigh the rst ingredient.

3. Press the “TARE” key to zero the display (0 g / lb 0:0.0 oz).

4. Weigh the second ingredient.

Kg/lb Key

This key positioned on the bottom of the scale, allows selecting the meas-

urement unit for the weighing: kg or lb. Switch on the scale by pressing the

“ON/OFF”key (TOUCH SCREEN key). Select the wished measurement unit

using the kg/lb key. The display shows “0 g” or “lb 0 : 0.0 oz”. Switch from

one measurement unit to the other by selecting again the wished measure-

ment unit using the kg/lb key. When the display shows the selected meas-

urement unit, proceed with the weighing. Moreover, it is possible to switch

from one measurement unit to the other by gently touching the “ON/OFF”

key while the display shows “8888” (before “0 g” or “0 lb : 0.00 oz” appears

on the display).

Room temperature

This scale can show the room temperature in °C or °F by means of the dis-

play positioned in the middle of the scale itself. To select the measurement

unit, press the key positioned on the bottom of the scale. The display

shows “… C” or “…°F”. Switch from one measurement unit to the other by

pressing the key

again, until the display shows the selected measure-

ment unit.

DATE, TIME, AND ALARM SETTING

This scale is equipped with calendar (g. 1), clock function (g. 2), and alarm

clock function (g. 3).

Calendar – Date setting (g. 1)

1. Press the MODE key positioned on the bottom of the scale; the display

shows “1M 1D”.

2. Keep the MODE key pressed for some seconds. When the numbers on the

display start to blink it means that it is possible to set the date.

3. Set the year by pressing and . Keeping the keys pressed, the scroll-

ing of the numbers becomes faster. Press the MODE key to conrm the set

year.

4. At this point, on the display blinks the message “1M”; set the month by

pressing the keys and and conrm by pressing the MODE key.

5. Finally, set the day (“1D”) by pressing the keys and and conrm by

pressing the MODE key.

6. The calendar has now been set; after few seconds, the display shows the

time.

While setting the date, if no key is pressed within 10 seconds, the display

stops blinking. Then, repeat the procedure from point 1.

Clock function - Time setting (g. 2)

1. Keep the MODE key pressed for some seconds. When the numbers on the

display start to blink it means that it is possible to set the time.

2. Press the keys and to set the hours and conrm by pressing the

MODE key.

3. At this point, press the keys and to set the minutes. Keeping the

keys pressed, the scrolling of the numbers becomes faster. Press the MODE

key to conrm the set time.

4. It is possible to select the 12/24-hour format. If the 24-hour format is se-

lected (1 to 12 and 1 to 12 p.m.), the display shows the icon “PM” when the

indicated time refers to the afternoon. To select the 12-hour format, keep

the key pressed till the display shows PM. To display the 24-hour format

again, keep the key pressed till the “PM” message disappears from the

display.

While setting the time, if no key is pressed within 10 seconds, the display

stops blinking. Then, repeat the procedure from point 1.

Alarm clock function (g. 3)

By setting the alarm clock function, the scale emits a long acoustic signal

(alarm clock) when the pre-set time is reached.

1. Press the MODE key to select the alarm clock function (g. 3).

2. Keep the MODE key pressed for some seconds. When the numbers on the

display start to blink it means that it is possible to set the alarm clock time.

3. Press the keys and to set the hours and conrm by pressing the

Stadler Form SFL.0011 Инструкция по эксплуатации онлайн [8/17] 175450

Содержание

Похожие устройства