Ada plodder kw30 а00422 Инструкция по эксплуатации онлайн [4/49] 189150

Plodder K28 / KW30 / KW55

- Keep away from rotating parts while the generator is running.

- The generator is a potential source of electrical shocks when misused; do not operate with wet hands.

- Do not operate the generator in rain or snow and do not let it get wet.

- The power generator is a mains replacement that generates electrical power for supply to a mobile distribution system.

- The power generator must be operated outdoors within the prescribed voltage, output and rated speed limits (see type plate).

- The power generator must not be connected to other electrical supply systems or electric generation systems (e.g. other power generators).

- The power generator may not be used in environments where there is a risk of explosion.

- The power generator may not be used in environ·ments where there is a risk of fire.

- The power generator must be operated in accordance with the conditions set out in the technical documentation.

- All improper use of the power generator including all uses not described in these instructions will constitute unauthorized incorrect usage

for which the manufacturer is not legally liable.

- Operation in environments where there is a risk of explosion and fire.

- Operation in enclosed areas and under direct exposure to rain or snowfall.

- Operation without the requisite safety precautions and connected to existing supply network systems.

- Spraying with high-pressure cleaners or fire extinguishing equipment.

- Non-compliance with regular servicing requirements.

- Failure to carry out measurements and checks for early detection of defects.

- Know and apply the Prevention of Injury regulations and the safety instructions for the power generator.

- Understand and be able to practically implement the technical documentation.

- The operator must know the functions of, and be able to use, the components of the power generator.

- The operator must wear the appropriate personal safety equipment.

- The labelling on the electrical generator must be complete and maintained in a readable condition.

- Constructive changes may not be carried out on the electrical generator.

- The rated speed of the motor has been set during manufacture and may not be changed.