Blue Weld prestige 186 pro 816316 Инструкция по эксплуатации онлайн [5/17] 190138
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Blue Weld prestige 186 pro 816316 Инструкция по эксплуатации онлайн [5/17] 190138

Blue Weld prestige 186 pro 816316 Инструкция по эксплуатации онлайн [5/17] 190138
- 5 -
GB
INSTRUCTION MANUAL
WARNING! BEFORE USING THE WELDING MACHINE READ
THE INSTRUCTION MANUAL CAREFULLY.
ARC WELDING MACHINES FOR COATED ELECTRODES (MMA)
FOR INDUSTRIAL AND PROFESSIONAL USE.
Note: In the following text the term “welding machine” will be used.
1.GENERALSAFETYCONSIDERATIONSFORARCWELDING
The operator should be properly trained to use the welding
machine safely and should be informed about the risks related
to arc welding procedures, the associated protection measures
and emergency procedures.
(Please refer to the applicable standard “EN 60974-9: Arc
welding equipment. Part 9: Installation and Use).
- Avoid direct contact with the welding circuit: the no-load
voltagesuppliedbytheweldingmachinecanbedangerous
under certain circumstances.
- When the welding cables are being connected or checks
and repairs are carried out the welding machine should be
switched off and disconnected from the power supply outlet.
- Switch off the welding machine and disconnect it from the
power supply outlet before replacing consumable torch parts.
- Make the electrical connections and installation according to
the safety rules and legislation in force.
- The welding machine should be connected only and
exclusivelytoapowersourcewiththeneutralleadconnected
to earth.
- Make sure that the power supply plug is correctly connected
to the earth protection outlet.
- Do not use the welding machine in damp or wet places and do
not weld in the rain.
- Do not use cables with worn insulation or loose connections.
- Do not weld on containers or piping that contains or has
containedammableliquidorgaseousproducts.
- Donotoperateonmaterialscleanedwithchlorinatedsolvents
or near such substances.
- Do not weld on containers under pressure.
- Removeallammablematerials(e.g.wood,paper,ragsetc.)
from the working area.
- Provide adequate ventilation or facilities for the removal of
welding fumes near the arc; a systematic approach is needed
inevaluatingtheexposurelimitsfortheweldingfumes,which
will depend on their composition, concentration and the
length of exposure itself.
- Keep the gas bottle (if used) away from heat sources,
including direct sunlight.
- Use adequate electrical insulation with regard to the electrode,
the work piece and any (accessible) earthed metal parts in the
vicinity.
This is normally achieved by wearing gloves, shoes, head
coverings and clothing designed for this purpose and by
using insulating platforms or mats.
- Always protect your eyes using masks or helmets with special
actinic glass.
Usespecialre-resistantprotectiveclothinganddonotallow
the skin to be exposed to the ultraviolet and infrared rays
produced by thearc; other peoplein the vicinityof the arc
shouldbeprotectedbyshieldsofnon-reectingcurtains.
- The ow of the welding current generates electromagnetic
elds(EMF)aroundtheweldingcircuit.
Electromagnetic elds can interfere with certain medical
equipment (e.g. Pace-makers, respiratory equipment, metallic
prostheses etc.).
Adequate protective measures must be adopted for persons
with these types of medical apparatus. For example, they must
be forbidden access to the area in which welding machines are
in operation.
This welding machine conforms to technical product standards
forexclusiveuseinanindustrialenvironmentforprofessional
purposes. It does not assure compliance with the basic limits
relative to human exposure to electromagnetic elds in the
domesticenvironment.
The operator must adopt the following procedures in order to
reduceexposuretoelectromagneticelds:
- Fasten the two welding cables as close together as possible.
- Keep head and trunk as far away as possible from the welding
circuit.
- Neverwindweldingcablesaroundthebody.
- Avoidweldingwiththebodywithintheweldingcircuit.Keep
both cables on the same side of the body.
- Connect the welding current return cable to the piece being
welded, as close as possible to the welding joint.
- Do not weld while close to, sitting on or leaning against the
welding machine (keep at least 50 cm away from it).
- Donotleaveobjectsinferromagneticmaterialinproximityof
the welding circuit.
- Minimum distance d= 20 cm (Fig. I).
- Class A equipment:
This welding machine conforms to technical product standards
for exclusive use in an industrial environment and for
professional purposes. It does not assure compliance with
electromagnetic compatibility in domestic dwellings and in
premises directly connected to a low-voltage power supply
system feeding buildings for domestic use.
EXTRA PRECAUTIONS
- WELDINGOPERATIONS:
- Inenvironmentswithincreasedriskofelectricshock
- Inconnedspaces
- Inthepresenceofammableorexplosivematerials
MUSTBEevaluatedinadvancebyan“Expertsupervisor”and
must always be carried out in the presence of other people
trainedtointerveneinemergencies.
AllprotectivetechnicalmeasuresMUSTbetakenasprovided
in 7.10; A.8; A.10 of the applicable standard EN 60974-9: Arc
weldingequipment.Part9:InstallationandUse”.
-The operator MUST NOT BE ALLOWED to weld in raised
positions unless safety platforms are used.
-VOLTAGEBETWEENELECTRODEHOLDERSORTORCHES:
working with more than one welding machine on a single piece
or on pieces that are connected electrically may generate a
dangerous accumulation of no-load voltage between two
differentelectrodeholdersortorches,thevalueofwhichmay
reach double the allowed limit.
An expert coordinator must be designated to measuring
the apparatus to determine if any risks subsist and suitable
protection measures can be adopted, as foreseen by section
7.9 of the applicable standard “EN 60974-9: Arc welding
equipment.Part9:InstallationandUse”.
RESIDUAL RISKS
-IMPROPERUSE:itishazardoustousetheweldingmachine
for any work other than that for which it was designed (e.g.
de-icing mains water pipes).
2. INTRODUCTION AND GENERAL DESCRIPTION
This welding machine is a power source for arc welding, made
specically for direct current (DC) .
The specic characteristics of this regulation system (INVERTER),
i.e. high speed and precise regulation, mean the welding machine
gives excellent results when welding both with coated electrodes

Содержание

Похожие устройства

Скачать