Home
Главная
Briggs&Stratton
Мотопомпа
wp2-60 073010
Инструкция по эксплуатации Страница: 6

Briggs&Stratton wp2-60 073010 Инструкция по эксплуатации онлайн [6/152] 190221

6 BRIGGSandSTRATTON.COM

Assembly

Read entire operator’s manual before you attempt to

assemble or operate your new water pump.

Every effort has been made to ensure that information in this

manual is accurate and current. However, we reserve the

right to change, alter or otherwise improve the product and

this document at any time without prior notice.

Your water pump requires some assembly and is ready

for use after it has been properly serviced with the

recommended oil and fuel.

If you have any problems with the assembly of your water

pump, please contact the store at which you purchased the

unit or any authorized dealer. If calling for assistance, please

have the model, revision, and serial number from the ID label

available.

Unpack Water Pump

1. Remove everything from carton except water pump.

2. Open carton completely by cutting each corner from top

to bottom.

3. Ensure you have all included items prior to assembly.

Items in the carton include:

 • Waterpump

 • Partsbag(whichincludesthefollowing):

  • Operator’smanual

  • Strainerbasketandbarb

  • Hosebarb(2)

  • Barbcuff(2)

  • Rubberseal(2)

  • Hoseclamp(3)

To prepare your water pump for operation, you will need to

performthesetasks:

1. Add oil to engine crankcase.

2. Add fuel to fuel tank.

3. Move water pump to safe operating location.

4. Assemble and connect hoses.

5. Locate strainer basket into water source.

6. Prime the water pump.

Add Engine Oil

1. Place pressure washer on a flat, level surface.

2. Clean area around oil fill (A) and remove oil dipstick.

3. Using oil funnel (optional), slowly pour recommended

oil into oil fill opening until the point of overflowing (B).

Verify oil is the correct viscosity for current

ambient temperature.

NOTICE Improper treatment of water pump could damage

it and shorten its life.

 • DONOTattempttocrankorstarttheenginebeforeit

has been properly serviced with the recommended oil.

This could result in an engine failure.

4. Replace oil fill cap and fully tighten.

Briggs&Stratton wp2-60 073010 Инструкция по эксплуатации онлайн [6/152] 190221

Похожие устройства