Home
Главная
Festool
Эксцентриковая Шлифмашина
ets ec150/5a eq 571883
Инструкция по эксплуатации Страница: 11

Festool ets ec150/5a eq 571883 Инструкция по эксплуатации онлайн [11/77] 192794

ETS EC 150

Original operating manual

1Symbols

2 Safety instructions

2.1 General safety instructions

WARNING! Read all safety warnings and all

instructions.

Failure to follow the warnings

and instructions may result in electric shock, fire

and/or serious injury.

Save all warnings and instructions for future ref-

erence.

The term "power tool" in the warnings refers to

your mains-operated (corded) power tool or bat-

tery-operated (cordless) power tool.

2.2 Machine-related safety instructions

–

Harmful/toxic dusts can be produced during

your work (e.g. lead-containing paint, some

types of wood and metal).

Contact with these

dusts, especially inhaling them, can represent a

hazard for operating personnel or persons in the

vicinity. Comply with the safety regulations that

apply in your country. Connect the electric power

tool to a suitable extraction system.

To protect your health, wear a P2 protective

mask.

Always wear protective goggles to protect

against sanding hazards.

–

Use a residual current protective device when

metal grinding, as well as when the operation of

the power tool in a wet environment cannot be

avoided.

In the event of an electric shock, the

protective switch protects you against life-

threatening current through the body.

–

Clean work equipment soaked in oils, for exam-

ple sanding pad or polishing felt, with water and

allow to dry.

Work equipment soaked in oil may

combust spontaneously.

–

Attention: Risk of fire! Avoid overheating the

grinding material and the sander. Always empty

the dust container before taking a break.

Swarf

in the filter bag or filter of the mobile dust ex-

tractor may self-ignite in unfavourable condi-

tions such as flying sparks when grinding metals.

Particular danger exists if the swarf is mixed with

paint, polyurethane residue or other chemical

materials and the grinding material is hot after

long periods of work.

–

Always use original Festool sanding pads.

For-

eign pads are not suitable for the speed of the

sander and may break.

–

If the power tool is dropped or falls, check for

damage to the machine and sanding pad. Re-

move the sanding pad for closer inspection. Re-

pair damaged parts before using again.

Broken

sanding pads and damaged machines can cause

injuries and machine instability.

–

Only for AS/NZS:

The tool shall always be sup-

plied via residual current device with a rated re-

sidual current of 30 mA or less.

2.3 Metal processing

When processing metal, the following mea-

sures must be taken for safety reasons:

– Install an upstream residual-current circuit

breaker (FIG, PRCD).

– Connect the machine to a suitable dust extractor.

–Regularly remove dust deposits from the motor

housing of the machine by blowing.

2.4 Emission levels

Levels determined in accordance with EN 60745 are

typically:

Symbol Significance

Warning of general danger

Risk of electric shock

Read operating instructions and safety

notices!

Wear ear protection.

Wear a dust mask.

Wear protective goggles.

Do not dispose of with domestic waste.

Tip or advice

Handling instruction

Safety class II

Wear protective goggles.

Sound pressure level L

= 73 dB(A)

Noise level L

= 84 dB(A)

Measuring uncertainty allow-

ance

K = 3 dB

Festool ets ec150/5a eq 571883 Инструкция по эксплуатации онлайн [11/77] 192794

Похожие устройства