Festool ets ec150/5a eq 571883 Инструкция по эксплуатации онлайн [14/77] 192794
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Festool ets ec150/5a eq 571883 Инструкция по эксплуатации онлайн [14/77] 192794

Festool ets ec150/5a eq 571883 Инструкция по эксплуатации онлайн [14/77] 192794
14
ETS EC 150
GB
The power tool does not have its own extractor unit.
At the extractor connector
[1-5]
, a Festool mobile
dust extractor with an extraction hose diameter of
27 mm should be connected.
Recommendation:
Use anti-static extractor hose!
This helps reduce the electric charge.
8 Working with the machine
Observe the following instructions:
– Do not overload the machine by pressing with ex-
cessive force! The best sanding results are
achieved with moderate application pressure.
The sanding capacity and quality are mainly de-
pendent on the selection of the correct abrasive.
– Hold the machine with two hands, one on the mo-
tor housing and one on the gear head.
For sanding we recommend the following settings
for the adjusting wheel
[1-2]
:
9 Service and maintenance
Customer service and repair
only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
Use only original Festool spare parts!
Order No. at: www.festool.com/service
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of blockages.
In the event of a slowdown in performance or in-
creased vibrations, blow and clean cooling air
openings.
9.1 Cleaning the extraction channels
We recommend cleaning the extraction channels in
the machine
[4-1]
roughly once a week (particular-
ly if sanding synthetic resin, in the case of wet sand-
ing and if sanding plaster) using a small flat brush
or a cloth.
9.2 Cleaning the inside of the power tool
Regularly clean the inside of the power tool at the
bottom of the fan,
[4-3]
otherwise the vibration val-
ues worsen as a result of the dust accumulation.
WARNING
Risk of injury
Always secure the workpiece in such a manner
that it cannot move while being machined.
Sanding work Adjusting
wheel set-
ting
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered surface
prior to paintwork
– Intermediate sanding of paintwork on sur-
faces
5 - 6
– Sanding thinly applied undercoat
– Sanding wood with nonwoven pad
– Edge breaking on wooden parts
– Smoothing primed wooden surfaces
4 - 5
– Sanding solid wood and veneered edges
– Sanding rebate of windows and doors
– Intermediate sanding of paintwork at edg-
es
– Light sanding of natural wood windows
using nonwoven pad
– Smoothing wooden surfaces using non-
woven pad before staining
– Rubbing or removing excess limestone
residue using nonwoven pad
3 - 4
– Intermediate sanding of paintwork on
stained surfaces
– Cleaning natural wood window rebate us-
ing nonwoven pad
2 - 3
– Sanding stained edges
– Sanding of thermoplastics
1 - 2
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
Sanding work Adjusting
wheel set-
ting
EKAT
1
2
3
5
4

Похожие устройства

Скачать