Home
Главная
Honeywell
Фильтр
fk06-1/2"aa 1076h
Инструкция по эксплуатации Страница: 8

Honeywell fk06-1/2"aa 1076h Инструкция по эксплуатации онлайн [8/18] 194594

MU1H-1126GE23 R0609 8 Honeywell GmbH

9.4 Cleaning

If necessary, the filter bowl and the filter can be cleaned.

1. Close shutoff valve on inlet

2. Release pressure on outlet side (e.g. through water tap)

3. Close shutoff valve on outlet

4. Unscrew filter bowl

o Use double ring wrench ZR06F

5. Remove filter, clean and reinsert

6. Place O-ring onto filter bowl

7. Screw in filter bowl hand-tight (without tools)

8. Slowly open shutoff valve on inlet

9. Slowly open shutoff valve on outlet

10. Disposal

• Dezincification resistant brass housing

• Brass threaded connections

• High-quality synthetic material valve insert

• High-quality synthetic material spring bonnet with adjust-

ment knob and setting scale

• Spring steel adjustment spring

• Stainless steel fine filter

• Red-bronze or shock-resistant, clear transparent synthetic

material filter bowl

• Fibre-reinforced NBR diaphragm

•NBR seals

Caution !

Do not use any cleaning agents containing solvents

and/or alcohol to clean the plastic parts!

Frequency: every 6 month (depending on local opera-

ting conditions)

To be carried out by an installation company

Detergents must not be allowed to enter the environ-

ment or the sewerage system!

Observe the local requirements regarding correct waste

recycling/disposal!

11. Troubleshooting

Problem Cause Remedy

Beating sounds Filter combination is toolarge Call our Technical Customer Services

Water is escaping from the spring

bonnet

Diaphragm in valve insert is faulty Replace valve insert

Too little or no water pressure Shutoff valves upstream or downstream

from filter not fully open

Open the shutoff valves fully

Filter combination is not set to the

desired outlet pressure

Set outlet pressure

Filter mesh dirty Clean or replace filter

Not fitted in flow direction Fit filter in flow direction (note direction of arrow

on housing)

The outlet pressure set does not

remain constant

Filter mesh dirty Clean or replace filter

Valve insert, sealing ring or edge of

nozzle is contaminated or worn

Replace valve insert

Rising pressure on outlet (e.g. in boiler) Check check valve, safety group etc.

Honeywell fk06-1/2"aa 1076h Инструкция по эксплуатации онлайн [8/18] 194594

Похожие устройства