Hyundai h-hi1-50-ui582 Инструкция по эксплуатации онлайн [7/54] 194799

Gas ceramic heater

3. DISPOSAL

Detailed information on the recycling can be obtained from representative of the local authority.



4. ASSEMBLY AND INSTALLATION

1. Carefully remove the heater from the package.

2. Carefully install the enclosed gas hose not twisting or breaking it. For that, screw one end of

the hose onto the gas valve connector, while the other end onto the connector of the enclosed gas

pressure controller (reducer). Secure the hose ends on the connectors with jubilee clips.

3. Install a paronite/rubber spacer inside the cap nut checking its integrity beforehand and then

carefully screw the nut on the outlet of an already prepared gas cylinder having appropriate

capacity (a gas cylinder is not included in the delivery set and purchased separately). Twisting of

the hose is strongly not allowed.

4. Slowly turning the gas pressure controller (cylinder check valve), make sure that no gas leaks

are present. For that:









instructed on use of the device by a person responsible for their safety. It is necessary to watch that

children do not play with the heater.

NOTE:

To improve products quality, design and technical characteristics of

the convector, as well as its scope of delivery can be revised without

advance notice.

5. Carry the heater to the supposed place of operation observing the rules and precautions de-

scribed in Section 2 of this Instruction Manual.

6. The appliance is ready for work.