Hyundai h-hg1-42-ui576 Инструкция по эксплуатации онлайн [8/54] 194802

Gas ceramic heater

IMPORTANT!

All gas joints and pipes should be absolutely tight to exclude even slight-

est gas leaks. Never use matches, lighters, and other sources of open





bedrooms, bathrooms, and cellars.







natural ventilation.

Do not use the heater during sleep.

-

erly rated hoses/pressure reducers for connection of the appliance.

Always use only the gas type indicated by the manufacturer.

IMPORTANT!

During operation of the appliance, watch that the gas cylinder is always

strictly vertical. Use of the cylinder in any other position may result in

occurrence of an emergency situation, breakdown of the appliance, and



It is prohibited to move or anyhow cover the heater during operation, as



The heater should be placed for operation so that its face plate is direct-

ed towards the room center. At that, distances to walls or other objects

on sides and behind the appliance should be at least 1 m.

4. Install a paronite/rubber spacer inside the cap nut checking its integrity beforehand and then

carefully screw the nut on the outlet of an already prepared gas cylinder having appropriate

capacity (a gas cylinder is not included in the delivery set and purchased separately). Twisting of

the hose is strongly not allowed.

5. Slowly turning the gas pressure controller (cylinder check valve), make sure that no gas leaks

are present. For that:

- Lubricate all joints with soapy water. Gas leaks cause formation of bubbles in permeable places.

- NEVER USE MATCHES OR LIGHTERS for gas leak checks.



6. Install the gas cylinder to the dedicated place inside the appliance and secure with the clamp.

7. Carry the heater to the supposed place of operation observing the rules and precautions

described in Section 2 of this Instruction Manual.

8. The appliance is ready for work.

NOTE:

Heater can be supplied with the connected gas hose and gear, in this

case to produce the above steps are not necessary.