Nilfisk ca 330 escalator Инструкция по эксплуатации онлайн [21/94] 196363

13 Using accessories

The brush type should be chosen to suit the surface to

be cleaned, and ﬁtted or removed as described earlier.

A side brush is an eﬀective means of cleaning close to

walls and right into corners.

The simply ﬁtted trolley provides for ease of movement

when transporting the machine.

13.1 Fitting the side brush

The side brush is ﬁtted to the left hand side of the

machine in the forward position. Switch oﬀ and unplug

the machine before ﬁtting the brush.

1. Remove the shaft from the front brush by pushing

out with the ﬁngers.

2. Take the plastic brush guard and screw it into the

side plate and tighten.

3. Slide side brush shaft through guard and front brush

(Fig.8).

13.2 Using the trolley

Warning - Empty all liquid from the machine before

using the trolley.

The trolley is attached to the left side of the machine.

The side brush if ﬁtted must be removed.

1. With the machine handle in the upright position place

trolley centrally alongside the machine.

2. Tilt the machine to raise the left side and engage the

two hooks on the trolley axle under the botttom edge

of the side plate (Fig.9).

3. The vertical leg of the trolley must engage with the

bottom handle of the machine, and the velcro strap

wrapped around the bottom handle to keep it in

place.

The machine can then be manouvered easily whilst

holding the top handle (Fig.10).