Severin PG 2792 Инструкция по эксплуатации онлайн [11/54] 22145
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Severin PG 2792 Инструкция по эксплуатации онлайн [11/54] 22145

to operate the grill.
Always bear in mind that the housing z
surfaces as well as the heating element
and the grill rack become very hot during
operation. Even a er the heating element
is switched o , it must not be touched until
it has su ciently cooled down - there is
otherwise a severe danger of burns.
To avoid the risk of electric shock, the z
heating element and the power cord must
not be immersed in liquid or even allowed
to come into contact with it.
Do not allow the power cord to touch any z
hot parts of the appliance.
e power cord should be regularly z
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Always remove the plug from the wall z
socket
a er use, -
in case of any malfunction, and -
during cleaning. -
e use of an extension-lead reel causes z
a loss of power, possibly combined with a
subsequent heat build-up in the cable. It
is therefore necessary to unwind the cable
completely if a cable reel is used. Make
sure that the reel is approved for outdoor
use by the manufacturer.
e appliance is not intended to be z
operated by means of an external timer or
separate remote-control system
Before carrying, transporting or storing z
the grill, ensure that is has su ciently
cooled down. Pour out any remaining
water a er use.
Ensure that the grill is not stored outdoors, z
or in any other location where it might be
subjected to extremes of temperature or
high humidity.
No responsibility can be/will be accepted z
if damage results from improper use, or if
these instructions are not complied with.
is barbecue grill is intended for z
domestic use only and not for commercial
applications.
In order to comply with safety regulations z
and to avoid hazards, repairs of electrical
appliances must be carried out by quali ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer service departments.  e
address can be found in the appendix to
this manual.
Grill with additional base stand:
Assemble the base stand according to the
schematic diagram supplied, and then
place the grill onto the stand.  e small
feet under the grill connect with the
tops of the vertical legs of the base stand.
Ensure that the grill and base stand are placed
in a safe and stable position.  e power cord
should be routed in such a way that no one is
likely to trip over it.
Heating element
e junction box contains a safety switch.
Place the heating element into the grill pan.
e safety switch is activated automatically
when the heating element has been properly
tted. If not  tted correctly, the appliance can
not be switched on.
Before using for the  rst time
Remove any packaging materials from the –
appliance.
Clean the grill rack and grill pan with –
warm soapy water.
Grill assembly: –
1. Place the heating element into the grill
pan.
2. Fit the grill rack on top.
3. If required, additional accessories may
be  tted according to the diagram
shown in the instructions.
Fill the grill pan with water up to the –
‚Max‘ marking.
Let the grill heat up for approximately 5 –
minutes without any food on the rack.  is
will lessen the smell typically encountered
when  rst switching on a new grill (a slight
smell and a little smoke may be emitted -
ensure su cient ventilation).
11

Содержание

Похожие устройства

Скачать