Home
Главная
Ryobi
Бензиновая Газонокосилка
rlm4114
Инструкция по эксплуатации Страница: 14

Ryobi rlm4114 Инструкция по эксплуатации онлайн [14/344] 198549

English

TROUBLESHOOTING

Problem Possible cause Solution

The handle is not in

the correct position.

The handle is positioned incorrectly. Check and ensure that the lower part of handle is

pushed fully back and snapped into proper position.

The handle knobs are not tightened. Tighten the handle knobs.

The mower does

not start.

There is no petrol. Fill the mower with petrol. If the mower still does not

start, contact an authorised service centre.

The engine is ﬂ ooded. Wait for 15 minutes, then try starting the mower again.

Do not prime before attempting to start.

The starter rope is harder to pull now

than when it was new.

Contact an authorised service centre.

The mower is hard

to push.

The grass to be mowed is too tall.

The mower housing and blade is be-

ing dragged through heavy grass.

The cutting height is too low.

Raise the cutting height.

The wheel assembly needs cleaning. Clean the wheel assembly. See the Drive Gear

Maintenance section.

The mower is

vibrating at a higher

speed.

The blade is unbalanced. Replace the blade.

The motor shaft is bent. Stop the product. Make sure that all moving parts

have come to a complete stop. Allow the product to

cool down. Disconnect the spark plug wire. Inspect for

damage. Have the damage repaired by an authorised

service centre before restarting the product.

The grass catcher

is not being filled

up with grass even

though grass is

being cut from the

lawn.

The discharge chute is blocked. Stop the product. Make sure that all moving parts have

come to a complete stop. Allow the product to cool

down. Disconnect the spark plug wire. Remove grass

catcher and lift discharge chute cover. Beware of the

sharp blade and avoid contact. Remove the debris from

the discharge chute.

Ryobi rlm4114 Инструкция по эксплуатации онлайн [14/344] 198549

Содержание

Похожие устройства