Ryobi rsh2845t Инструкция по эксплуатации онлайн [6/36] 198820
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ryobi rsh2845t Инструкция по эксплуатации онлайн [6/36] 198820

Ryobi rsh2845t Инструкция по эксплуатации онлайн [6/36] 198820
4
MATERIAL SHREDDING METHOD
Twigs and up to
6 mm diameter.
Feed into the feeding
hopper at a rate which
the product will accept
without overloading.
Branches and
up to 45 mm in
diameter.
Clip off all side growth
with secateurs before
feeding into the feeding
hopper.
Bedding plants,
weeds and
shrubby growth.
Knock soil and stones
off the roots to avoid
damage to the blades.
Freshly cut
foliage, hedge,
and kitchen
waste.(I.e.
cabbage
leaves,
vegetable
peelings etc.)
With any material having
a high moisture content
it is advised to feed in
some drier sticks at
regular intervals to help
push the material trough
the cutting assembly and
prevent it from clogging.
Dry sticks and
twigs
By inserting these at the
end of your shredding
task, this will help to
clean the moisture and
plant sap from the inside
of the product and the
cutting assembly.
Ŷ Do not allow garden waste to accumulate
before shredding as it will begin to compost,
become too damp and clog the cutting
assembly. Dry material will help most material
to clear the ejection chute. Save some dry
sticks until last to help clean the blade area.
Ŷ Frequently monitor the build up/collection of
shredded material.
Ŷ The exit of the discharge chute must be clear
at all times to prevent blockages.
Ŷ When the collection box is full, turn the
product Off before emptying.
WARNING
Do not put your hands up inside the
shredder’s discharge chute to clear away
shredded material while the product is
switched on or connected to the mains
supply. The blades are sharp. Wear heavy-
duty gloves and exercise extreme caution
when cleaning and clearing blockages.
WARNING
When feeding long woody branches/stems
into the product be careful of whip and
vibrations as they get caught by the cutter.
The operator must wear eye protection
whenever using the product.
WARNING
The cutting device has a tendency to pull
branches/stems into the product. Do not
try to impede entry of the material being
cut once feeding has started. Always wear
gloves to prevent skin lacerations when
feeding material into the product.
NOTE: In normal use, do not switch off the
product until all of the shredded material has
cleared the cutter assembly. If the product is
switched off too quickly, remaining pieces of
material may clog the blade assembly and stall
the motor when the product is switched back on.
SYMBOLS ON THE PRODUCT
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
%HZDUHRIWKURZQRUÀ\LQJREMHFWV
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area
Danger - Rotating blades. Keep hands
and feet out of openings while the
product is running.
Switch off and remove plug from
mains before maintenance or if cord is
damaged.
Wear eye and ear protection.
Do not use as a step.
Wait until all machine components
have completely stopped before
touching them.

Похожие устройства

Скачать