Ryobi vc30a Инструкция по эксплуатации онлайн [9/150] 198829
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ryobi vc30a Инструкция по эксплуатации онлайн [9/150] 198829

Ryobi vc30a Инструкция по эксплуатации онлайн [9/150] 198829
3
■ Never vacuum up hot ashes, pointed or sharp
objects.
■ Never use the appliance in damp rooms.
■ Don’t use the appliance without a dust bag (an
exception is wet vacuuming or with the cartridge
filter). Make sure that the dust bag is inserted into the
appliance correctly.
■
■ Keep the vacuum cleaner away from heat sources
such as radiant heaters, ovens, and so on.
DISPOSAL INFORMATION
■ The appliance contains electric and electronic
components and may not be disposed of as
household garbage.
■ The local and currently applicable legislation must
SPECIFICATIONS
Supply voltage:
Max. power:
Psum:
Tank volume:
Hose system:
Filter - dry:
Filter - wet:
230V~/50Hz
1400W
3600W
30 l Plastic
35 mm Ø
paper bag
foam filter
VC30A
■ Carefully unpack the contents of the box.
■ Hold the two clamps, which hold the upper section
in its position and fold them upwards.
■ Loosen the clamps, remove the upper section,
and remove the contents from the tank.
■ Please check the parts using the components list
to make sure they are complete and that there
has been no damage in transport.
■ If any parts are missing or damaged, then please
contact your dealer immediately.
PACKAGING CONTENT
■ Make sure that the connector is not plugged in.
■ Hold the two clamps, which hold the upper
section in its position and fold them upwards.
(Fig. 2)
■ Loosen the clamps and lift the upper section up
and out. (Fig. 3)
■ Remove the contents from the tank and turn the
tank over.
ROLLER ASSEMBLY
VC30A
■ Put the four rollers in the guides on the bottom of
the tank. (Fig. 4)
■ Check that the rollers have been pushed
completely into the guides.
■ Fasten the rollers with four accompanying
screws. (Fig. 5)
FILTER ASSEMBLY
■ Insert the foam filter that has been supplied for
wet vacuuming. (see the section called "WET
VACUUM CLEANING")
■ Insert the dust bag that has been supplied for dry
vacuuming. (see the section called "DRY
VACUUM CLEANING")
■ Replace the upper section on the tank. (Fig. 6)
■ Align the upper section with the clamps.
(Fig.7)
■ Hook the clamps into the upper section and
let them snap into place by pressing the clamps
downwards.
■ Place the large end of the hose on the front air
intake stub on the tank. (Fig. 8)
■ Select a nozzle or the wand and slide it over the
vacuum hose. (Fig. 9)
■ After using and cleaning the appliance, store the
accessories by attaching them to the
corresponding holders on the vacuum cleaner.
(Fig. 10)
See figure 1-3
ASSEMBLY
SPECIAL SAFETY RULES
When using the appliance, make sure that no hair or
clothing is drawn in.
be observed.

Похожие устройства

Скачать