Timberk thu mini 02 p Инструкция по эксплуатации онлайн [6/20] 200898
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Timberk thu mini 02 p Инструкция по эксплуатации онлайн [6/20] 200898

Timberk thu mini 02 p Инструкция по эксплуатации онлайн [6/20] 200898
www.timberk.com • electric humidifier
6
8. CLEANING AND SERVICING THE UNIT
IMPORTANT!
When the unit is operating, you must not remove the
water tank or the upper cover until there is water in them.
Otherwise, the water level inside the unit will rise, which may
cause its failure or malfunction (steam will stop outflowing).
To resume the operation in case of malfunction, disconnect
the unit from the power line and drain water. Important!
Drain water from the unit only towards the atomizer’s spout
(i.e. to the right, when looking at the on/off regulator).
Prior to cleaning the unit make sure the power supply’s plug is disconnected
from the outlet. Otherwise, it may cause electric shock.
Prior to cleaning remove the case cover and wait until water, remaining in
the unit’s case, completely cools down.
Clean the unit once or twice a week.
8.1. Use a damp and soft fabric to wipe internal surface of the unit.
IMPORTANT!
To avoid deformation or wear of working surfaces,
resulting in decreased atomizing or other malfunctions,
do not use metallic brushes, blades or talc powder to
wipe the atomizer’s surface.
In case of water leakage, immediately stop using the unit
and contact a service center.
To keep the unit dry, remove water after cleaning and
make sure to dry the unit’s case.
Make sure that there is no water left inside the unit’s
case.
Prior to a long break in using the unit, dry its surface and
pack it into a plastic bag, then put it into a box.
Store the unit in a low-humidity room.
Storing the unit undried results in generation of mold.
NOTE:
When using the humidifier, you may come across
condensate generation of objects next to it, including
water accumulation, which is not a defect, but a feature
of its operation. This feature may have several causes,
listed in table 2 on page 7.
hygrometer*, which measures the level of relative humidity.
When water level goes lower than the minimum permissible level, the unit’s
ultrasonic membrane will be switched off automatically, at the same time
the atomizer’s backlight will light down. Fill the tank with water to continue
operation of the unit.
To switch off the unit turn the on/off and steam outflow intensity regulator into
«OFF» position or lift down the atomizer, at the same time the atomizer’s stand
will light down.
* not included in the delivery set
To avoid electric shock do not scratch or damage elements of the unit
when cleaning.
When cleaning, do not use solvents, benzene, xylene, scrub brush, talc
powder and other substances except for water.
8.2. Wipe off remains of water inside the unit’s case using a damp and
soft fabric.
To wipe of remains of water on small parts you can use a soft brush and
then wipe them with a soft fabric again.
8.3. In case of dirt (scale) on the membrane, clean it with a soft brush.
8.4. Use a soft brush to wipe off remains of water on the surface of the
atomizer’s nozzle, and then wipe it with a soft fabric again.
8.5. Clean the water intake and the atomizer with clean water, as well as
the case cover. Do it carefully and lightly.
After removing water from the atomizer’s surface clean it with a soft fabric.
Clean the unit’s external surface with a damp and soft fabric.

Похожие устройства

Скачать