Home
Главная
Timberk
Инфракрасный Обогреватель
tch a1b 700
Инструкция по эксплуатации Страница: 7

Timberk tch a1b 700 Инструкция по эксплуатации онлайн [7/20] 201228

www.timberk.com • electric ceiling heater

1. Before switching the heater, it is necessary to thoroughly wipe the

surface of the radiating boards first with a soft rag moistened in alcohol

and then with a dry rag in order to exclude appearance of burnt spots.

2. After switching and reaching the working mode, the appliance starts to

radiate infrared beams and heat the surrounding objects/bodies.

3. To exclude unpleasant burnt odor, it is recommended to keep the heater

clean preventing accumulation of dust on it.

Possible malfunctions and remedies for them are given in Table 5.

Table 5

If you are not able to remedy a malfunction according to the

recommendations or other malfunctions occur, contact the authorized

service center of Timberk.

1. During operation, it is necessary to periodically (once a year) check the

electric cable contacts and terminal connectors for good tightening.

2. If the body becomes dirty, wipe off dust with a towelette. Radiating

boards should be wiped in cold condition with alcohol.

7. OPERATION

9. TROUBLESHOOTING

8. MAINTENANCE

NOTE:

Discoloration of paint on the heater body wall directed

to the ceiling during operation is not a defect. Changing

of colour for heating plates is not defect.

NOTE:

Radiating boards should be wiped with a soft rag

moistened in alcohol leaving no scratches on the

surface. Use of other liquids is prohibited!

WARNING!

Slight crackles may be heard during operation at the

moment of heating or cooling, which disappear, when

the heater reaches the working mode.

Malfunction Cause Remedy

1. The heater heats poorly

1. The heating element is faulty

1. Contact the authorized service center

of Timberk

2. Low voltage in the electric mains 2. Check voltage in the electric mains

2. The heater does not work

1. No voltage in the electric mains

1. Check presence of voltage in the

electric mains

2. Breakdown of the electric cable

2. Check integrity of the electric cable and

replace it if necessary

3. The automatic circuit breaker of the

electric mains is faulty

3. Check operability of the automatic circuit

breaker of the electric mains and replace

the faulty circuit breaker if necessary

4. Breakdown in the heating element circuit

4. Contact the authorized service center

of Timberk

Timberk tch a1b 700 Инструкция по эксплуатации онлайн [7/20] 201228

Похожие устройства