Texas El-Tex 2000 Инструкция по эксплуатации онлайн [13/41] 205968

7. Lubrication

The gear is from the factory lubricated.

8. Maintenance and storage

Clean all grass and soil from machine after each use.

If not to be used for an extended period, coat all metal parts in grease to avoid corrosion

and rust.

Use original spare parts only

9. Troubleshooting

Problem Casue Solution

Motor will not start: No power Check power supply and cables

Defective safety button Contact authorized workshop

Overheating cutout activat-

ed?

a. Cut shallower

b. Remove any blockages

c. Soil too hard. Change depth

and run slowly backwards and

forwards several times.

Do not restart for 15 min.

Abnormal noise Blade stuck Switch off machine and allow to

stop completely. Remove obstruc-

tion.

No lubrication Contact authorized dealer

Loose bolts, nuts or safety

equipment.

Tighten. Contact authorized work-

shop if noise persists

Abnormal vibrations Depth too great Replace or contact authorized

workshop

Depth too great Use correct depth

Poor cutting action Depth too shallow Use correct depth

Worn blade Replace or contact authorized

workshop

10. Specifications

Model

El-Tex 2000

Power supply 230 Volt - 50 Hz

Power consumption 2000 Watt

Cutting width 450 mm

Max. working depth 260 mm

Noise level 96 dB(A)

Weight 31.5 kg

RPM approx. 140/min.