Texas MPC1300 Инструкция по эксплуатации онлайн [11/13] 206346

Operating of the machine

Starting the machine.

Press the safety lock button (A) while triggering

the throttle. (B)

Keep holding the lever and release the safety

lock button.

Release the throttle lever to stop the machine

Operation and recommendation

• Never use the machine if the grass is longer

than 75 mm.

• Press the start button and pull the handle up.

• Use the machine as shown in ill and remember

to empty the collector regularly

• Never use the machine in rain, or damp conditions.

• It is recommended to use the machine at least 2

times a year, spring and autumn.

FAQ

• Should the product stop during use, it can be due to overheating. The product is

equipped with a thermos switch and only needs to cool 15 minutes before it can be

started again.

Risk of overheating

•

If the machine becomes blocked with moss or grass, and continues to operate, there is a high risk of overheating.

• If the machine overheats, its thermal cutout will trip and cause the machine to stop.

• The machine will be able to be used again once it has cooled down sufficiently.

• Cooling takes around 10–15 minutes.

• If you frequently experience this problem, it is recommended that the machine is operated without the collection

box, with full rear discharge activated. This will prevent blockage and ensure that there is airflow through the

engine.

•

Maintenance and replacement of cylinder

Loosen the 2 screws (Right side)

Pull out the cylinder gently from one side

Remove the bearing from the cylinder.

Carefully pull the cylinder out of the left axle.

Repair or replace cylinder.

To install the cylinder follow

steps 4 to 1