Siemens WD12D420 Инструкция по эксплуатации онлайн [11/62] 26739

Programme duration When the programme has been selected, the expected

programme duration (time after which the programme

is expected to end) is displayed.

The programme duration is displayed in hours and

minutes, e.g.

1:30 = 1 hour and 30 minutes

0:35 = 35 minutes.

When the programme has started, the programme

duration counts down in minutes.

When the programme ends, the displays shows -0-.

² While the programme is running, the programme

duration may be extended or reduced for the

following reasons.

Reductions in time occur because of:

– small loads,

– reduced heating times, e.g. if the water is very hot,

– reduced washing temperature after the programme

has started,

– the laundry for drying with low residual moisture.

Increases in time occur because of:

– additional rinse cycle if excessive foam is in the

laundry,

– multiple spinning if the laundry is distributed poorly

in the drum,

– increased heating times, e.g. when the water is too

cold,

– water pressure too low,

– selection of an additional option, e.g.

Extra Rinse ' and/or Intensive È after the

programme has started,

– very absorbent washing extends the heating

duration,

– the laundry for drying is wet.

Finish in time You can select the finish in time, see page 32.

Drying duration or

automatic drying

You can set the drying duration or automatic drying by

touching the

ˆ button, see page 28. When the wash-

ing and drying without a break was selected, time dry-

ing or auto drying duration will add in programme

duration automatically. Related programmes will

prolong 5-15 minutes for good washing performance.