Siemens WD12D420 Инструкция по эксплуатации онлайн [49/62] 26739

Siemens WD12D420 Инструкция по эксплуатации онлайн [49/62] 26739
49
Water not visible in the drum. Not a fault.
The water lies below the visible part of the drum.
Washing solution is not completely
drained.
Pumped blocked by foreign objects. Clean the pump (refer to page 44).
Fluff-producing laundry was
washed. The water drainage pipe or
drain hose is blocked.
Clean drainage pipe and/or
drainage hose.
Water runs out from under the
appliance.
Screw fitting of the inlet hose is
leaking.
Tighten the screw-fitting.
Drainage hose is leaking. Replace the drain hose.
Foam comes out of the detergent
drawer. The *symbol is displayed
when the overdosage of detergent
is detected.
Too much detergent or detergent
not suitable for use in washing
machines used.
Mix 1 tablespoon of fabric softener
with
½ litre of water and pour into
chamber II of the detergent
dispenser.
Reduce detergent dosage for next
wash cycle or use detergent which
is suitable for use in washing
machines.
The washing has not been spun
correctly.
Large laundry items have become
entangled and are not evenly
distributed in the drum.
For safety reasons, the high-speed
final spin cycle was automatically
cancelled.
Do not put only large items in the
drum.
Spin result unsatisfactory. Low spin speed selected.
The Rinse ' or Spin Í programme selected maximum spin speed:
see page 25.
Spin cycle actuated several times. Not a fault.
Unbalanced load detection system is attempting to compensate the
imbalance by spinning the washing several times.
Washing result not satisfactory. Soiling is greater than expected or
recommended load has been
exceeded.
Select suitable programme and
touch the Intensive È
button or
reduce load.
Detergent was underdosed. Dose detergent according to the
manufacturer's instructions.
Problems Cause Remedial action

Содержание

Скачать