Saturn ST-MC9187 Инструкция по эксплуатации онлайн [4/30] 259785
![Saturn ST-MC9187 Инструкция по эксплуатации онлайн [4/30] 259785](/views2/1304162/page4/bg4.png)
6
Run the selected program
Choose a cooking program
Turn on the Reheat Mode or Cancel program
Setting the cooking time in increments of "1 hour"
Setting the cooking time in increments of “1 minute”
After selecting the program, press this key to set the end of
cooking time
Press to increase the cooking time
Press to decrease the cooking time
Choose a cooking program
RICE program
1. Measure the rice with a measuring
cup that comes with the device. Rinse
the rice under running water in another
bowl. Do not rinse grain in a bowl of the
multi-cooker so that not to damage the
coating.
Maximum capacity of the measuring
cup is 180ml. The maximum quantity
of rice -10 cups.
Put the rice in a bowl of the multi-
cooker.
2. Pour the water into the bowl. The
recommended ratio of rice and water –
1:1.
Before use, wipe dry the outer surface,
especially the bottom of the bowl. Place
the bowl into the multi-cooker. Slightly
turning it counterclockwise, make sure
the bowl is tightly in contact with the
heating element. Close the cover until
it clicks, if the lid is not closed tightly,
the program will not work correctly.
Make sure the water is not too much
because it can flow over the edge of the
bowl. Lack of water can cause the rice
being undercooked and hard.
3. Plug the cord into the socket on the
device and connect it to the mains.
Press MENU key and select the
program RICE.
The cooking time is 50 minutes and
cannot be changed.
4. Press the START key. The START
indicator lights up when the cooking
process starts. At the end of the
cooking process you hear a beep and
the multi-cooker automatically
switches to the keep warm mode. If
you want to stop heating, press the
Reheat/Cancel key.
This program can be used not only for
cooking rice, but some other grain,
such as buckwheat, barley, etc. Before
cooking rinse and soak barley in cold
water for 3-6 hours.
SOUP program
1. Put the required ingredients in the
bowl.
2. Pour the necessary amount of water.
The maximum amount of water - 15
cups.
7
3. Press the MODE key, select the
SOUP program. The default cooking
time is 1 hour. You can change the
cooking time. Press the HOUR key,
then + or – key to increase or decrease
the cooking time. You can adjust not
only hours but minutes. Press the
MINUTE key, then + or -key. The time
increments -10 minutes. You can
change the cooking time from 20
minutes to 2 hours.
4. Press the START key to begin
cooking. The indicator light, function
name and cooking time are on the
display.
At the end of the cooking process you
hear a beep and the multi-cooker
automatically switches to the keep
warm mode. If you want to stop
heating, press the Reheat/Cancel key.
STEAM program
1. Pour the required amount of water
into the bowl.
2. Place the steamer in the bowl. Put
the food into the steamer and place the
bowl into the multi-cooker.
3. Press the MODE key to select the
STEAM program.
The default time -10 minutes.
The cooking time can be increased or
decreased in the range from 5 to 50
minutes after the water starts boiling.
Cooking time is limited by the amount
of water in the bowl.
Press the MINUTE key, then + or - key
to set the desired cooking time with
increments of 5 minutes.
4. Press the START key to begin
cooking.
At the end of the cooking process you
hear a beep and the multi-cooker
automatically switches to the keep
warm mode. If you want to stop
heating, press the Reheat/Cancel key.
STEW program
1. Put all the ingredients and spices in
the bowl, add a small amount of water.
Place the bowl into the multi-cooker.
2. Close the lid until it clicks.
3. Press the MODE key to select the
STEW program.
The default cooking time - 1 hour.
Possible range of time - from 20
minutes to 12 hours.
Press the HOUR key, then + or – key
to increase or decrease the cooking
time. You can adjust not only hours,
but minutes. For that press the MINUTE
key, then + or – key. Increments are
10 minutes.
4. Press the START key to begin
cooking. The indicator light, function
name and cooking time are on the
display.
At the end of the cooking process you
hear a beep and the multi-cooker
automatically switches to the keep
warm mode. If you want to stop
heating, press the Reheat/Cancel key.
CAKE program
1. Make the dough for baking. Grease
the bowl with fat so that it would be
easier to take the baked product out of
the bowl. Put the dough in the bowl and
flatten it. The dough should be below
the MAX mark.
2. Place the bowl into the multi-cooker,
close the lid until it clicks. Plug the
power cord into the socket of the
device and then to the mains.
3. Press the MODE key and select the
CAKE program.
4. Press the START key to begin
cooking. The indicator light, function
name and cooking time are on the
display.
The default cooking time is 50 minutes
without the possibility to change it.
At the end of the cooking process you
hear a beep.
The baked product should be removed
from the bowl within 2-3 minutes after
the program finished.
CRUST program
This program is intended for cooking
various kinds of casseroles, lasagna
and grilled meat, poultry dishes with a
crispy crust.
1. Put some oil into the bowl. Put the
ingredients according to the selected
recipe.
2. Place the bowl into the multi-cooker,
close the lid until it clicks. Plug the
power cord into the socket of the
device and then into the mains.
3. Press the MENU key, select the
CRUST program. The default time - 1
hour. Time can be increased or
decreased in the range of 20 minutes
to 2 hours.
Press the HOUR key, then + or – key
to set the desired cooking time with
increments of 1 hour. Press MINUTE
key, then + or – key to set the desired
cooking time with increments of 10
minutes.
4. Press the START key to begin
cooking. The indicator light, function
name and cooking time are on the
display.
At the end of the cooking process you
hear a beep and the multi-cooker
automatically switches to the keep
Содержание
- St mc9187 1
- International 15
- Manufacturer s warranty 15
- Mezinárodní záruka 15
- Зобов язання 15
- Международные гарантийные 15
- Міжнародні гарантійні 15
- Обязательства 15
- Praha 3 žižkov česká republika tel 4202 67 108 392 28
- Saturn home appliances s r o koněvova 141 13083 28
- Warranty coupon 28
- Záruční list 28
- Гарантийный талон 28
- Гарантійний талон 28
Похожие устройства
- Saturn ST-MC9203 Инструкция по эксплуатации
- Saturn ST-MC9189 Инструкция по эксплуатации
- Saturn ST-MC9208 Инструкция по эксплуатации
- Saturn ST-MC9209 Инструкция по эксплуатации
- Saturn ST-EC0105 Инструкция по эксплуатации
- Saturn ST-EC0104 Инструкция по эксплуатации
- Saturn ST-EC0100 Инструкция по эксплуатации
- Saturn ST-FP8088 Инструкция по эксплуатации
- Сварог MIG 2500(J73) Инструкция по эксплуатации
- Сварог MIG 3500(J72) Инструкция по эксплуатации
- Сварог MIG 5000(J91) Инструкция по эксплуатации
- Foxweld VARTEG 180 DUO Инструкция по эксплуатации
- Foxweld SAGGIO MIG 200-S Инструкция по эксплуатации
- Foxweld Varteg 150 DUO Инструкция по эксплуатации
- Foxweld INVERMIG 185M Инструкция по эксплуатации
- Foxweld INVERMIG 250 COMPACT (220V) Инструкция по эксплуатации
- Foxweld INVERMIG 250 PWE Инструкция по эксплуатации
- Foxweld INVERMIG 350 PWE Инструкция по эксплуатации
- Foxweld INVERMIG 300 PWE Инструкция по эксплуатации
- Saturn ST-CF1984U Инструкция по эксплуатации
Скачать
Случайные обсуждения