Bork CH BRE 1818 SI Инструкция по эксплуатации онлайн [27/32] 29909

Instruction manual

Eng

Figure 2

1. Mode & set time button

2. Power & thermostat Knob

3. Oscillation button

Figure 3

1. Mode indicator

2. Power indicator

3. Set time indicator

4. LED display

The heater may be operated by the manual controls located on

the heater (as shown in Figure 2) or by the remote controller. The

heater working state may be known from display panel (as shown

in Figure 3).

1. Carefully remove the heater from the bag and the carton.

2. The heater must be placed on a firm, level surface.

3. Plug the cord set into a 220-240V� electrical outlet. Be sure plug

fits tightly in outlet. A loose fit will cause overheating and damage

the plug. Plug and cord set may feel warm during normal usage.

4. When the heater is initially plugged in and turn on the power switch

on the base, there will be a “beep” and the red light will come on

indicating that there is power to the unit. The red light will remain

lit until the power switch on the base is turned off.