Bravilor Bonamat HW 10 Инструкция по эксплуатации онлайн [5/8] 273238
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bravilor Bonamat HW 10 Инструкция по эксплуатации онлайн [5/8] 273238

Bravilor Bonamat HW 10 Инструкция по эксплуатации онлайн [5/8] 273238
3
Keep the following instructions in mind
when installing a new plug:
− The yellow-green core (earth) must be
connected to the terminal marked with
the letter E or the earth symbol ( ) or
coloured green or yellow-green.
− The blue core (neutral) must be con-
nected to the terminal marked with the
letter N or coloured black.
The remaining brown core (live) must be
connected to the terminal marked with
the letter L or coloured red.
IMPORTANT !
The triple-core supply cord in fig. 3 is
colour-coded as follows:
Green and yellow - earth
Blue - neutral
Brown - live
INITIAL OPERATING PROCEDURE
The following procedure is to be carried
out when operating a new appliance for
the first time:
1. Remove the funnel.
2. Clean the inside of the kettle as
thoroughly as possible either with a
damp cloth or by rinsing with hot
water.
3. Replace the funnel.
4. Pour ca. 4.5 litres water into the
funnel.
5. When the water is hot, draw off as
much of it as possible via the tap and
dispose of it.
6. Then refill the funnel with cold water
to ca. 3 cm under the brim.
The appliance is now ready for normal
use.
ADJUSTMENT
The temperature of the water in the
reservoir can be adjusted. The
temperature can be set on the right side
of the machine (fig. 4) by means of the
screwdriver supplied.
− Turn the screwdriver tot the right to
increase the temperature.
− Turn the screwdriver tot the left to
decrease the temperature.
WARNINGS FOR THE ADJUSTING!
When adjusting our machines the
following rules must be observed:
1. When adjusting the water
temperature ensure that the water
within the machine does not reach
boiling.
2. The supplier is not liable for any
negative effect caused by a changed
adjustment of the machine.
1.4 Operation
Set switch 3 (fig. 1) in the on position, the
switch light will go on. The element will
now heat the water to ca. 95 °C. via the
tap and the water can be drawn off via
the tap.
When no more hot water can then be
drawn off via the tap, the kettle should be
topped up again to ca. 3 cm under the
brim of the funnel.
Fig. 4

Содержание

Похожие устройства

Скачать