Toshiba MMK-AP0123H — инструкция по снятию и установке PMV мотора [134/152]

134

No.

Part name

PMV motor

Procedures

Using spanners by 17mm and 19mm, remove the

PMV motor. <AP0243 to AP0153>

Using spanners by 16mm and 19mm, remove the

PMV motor. <AP0123 to AP0073>

To avoid deformation of the pipes, do not use a

monkey wrench. In case that the clearance to the

ceiling is 110, use a spanner with length by 150

mm or shorter.

1) Perform work of item

2) Perform work of item

3) Remove the bundling band of PMV motor lead

wire.

4) Pull off butyl of PMV main unit until the position

shown in the right photo.

5) Using a spanner, remove PMV.

Determine PMV motor lead wire drawing-out

position as same as that before removing.

Return butyl rubber to the original position.

Remarks

Spanner push-in part

(Main unit side: 17 mm)

Butyl rubber Spanner push-in part

(Motor side: 19 mm)

MAX 150

MAX 160

110 mm

or more

Spanner push-in part

(Main unit side: 16 mm)

Butyl rubber Spanner push-in part

(Motor side: 19 mm)

Horizontal

louver

1) Remove shaft of the horizontal louver from the

back body. (First remove the left shaft, and then

remove other shafts while sliding the horizontal

louver leftward.)