Shrinkfast 998 Инструкция по эксплуатации онлайн [6/44] 279501

Never operate the heat tool with the combustor nozzle hard up against a surface;
this could ignite any material you are shrink wrapping.
Do not place the combustor nozzle (where the flame comes out of the heat tool)
next to anything while it is hot.
Never allow the combustor nozzle to come in
contact with clothing or skin.
Do not look down the combustor nozzle while the tool is in operation or
attached to a fuel source.
The heat tool should be kept 6” 8” away from the shrink film when in
operation. Never keep the heat on one area for more than a few seconds.
Once heat is applied to the shrink film,
it will continue to shrink even after
the heat is moved away from the area.
Never modify the tool in any way and use only Shrinkfast replacement parts
.
Never operate in a basement or closed in, non-ventilated area.
Never operate the heat tool on an area that you cannot see.
Always operate the heat tool with the UL
®
Guard installed.
4
17967-Shrinkfast889wPageNos:Layout 1 11/11/15 1:19 PM Page 6

Содержание