Bomann GSPE 880 Инструкция по эксплуатации онлайн [7/24] 280861

7

Using the spacer bar

Using the spacer barUsing the spacer bar

Using the spacer bar

With this accessory you can compensate the gap between the control panel and decorative panel.

The spacer bar consists of several layers, which are connected with a click-

mechanism. Adjust the height of the spacer to the gap. To do this, remove the appro-

priate number of layers.

• Glue the Velcro strip A on the wooden panel (at the top and bottom) and the felt

strip B in the same heights on the appliance door.

• Align the panel and the appliance front against each other and fix the panel on the

appliance door.

• First remove the factory-mounted short screws (4 x s1) from the door inside.

• Screw the supplied long screws (4 x s2).

• Turn the adjusting screws as needed in the clockwise or counterclockwise

direction. The steel cable tightens or loosens.

• Check the door spring tension. If the door remains fully open horizontally

and can still be easily closed, the tension is correct. Otherwise do the ad-

justing again.

Connection to the water supply

Connection to the water supplyConnection to the water supply

Connection to the water supply

Adjusting the feet

Adjusting the feetAdjusting the feet

Adjusting the feet

Place the appliance in its proper position and take care that it is leveled solid and horizontal. Check this with a

spirit level.

• You can adjust the back foot by the adjusting screw (a) at the center of the

appliance plinth front with an Allen key.

• Adjust the front feet (b) with a screw-wrench until the dishwasher is leveled.

Fixing the dishwasher

Fixing the dishwasherFixing the dishwasher

Fixing the dishwasher

Fix the appliance by tighten the screws from the appliance inside to the provided holes accordingly.