Suunto X6HR Инструкция по эксплуатации онлайн [55/69] 32085

3.6.5. Timer

You can activate the timer to sound a signal after set periods. It can be used, for

example, for interval training. Two different intervals, Int1 and Int2, can be set.

The timer is synchronized with the stopwatch, and if turned on, it signals when the

stopwatch is running. If two intervals have been set, they will signal consecutively,

interval 1 with one long beep and interval 2 with two shorter beeps.

NOTE: You do not have to acknowledge the signal in any way when you hear it.

Activating the timer

To activate the timer:

1. In the Function menu, scroll to Timer with the arrow buttons and press Suunto.

The On/Off selection is activated.

2. Set the timer

on with the arrow buttons and press Suunto. A long press brings you

back to the main window if the interval is already correct. A short press activates the

Int1 minutes field.

3. Set the minutes with the arrow buttons and press

Suunto. The seconds field is

activated.

4. Set the seconds with the arrow buttons and press

Suunto. The Int2 minute field

is activated. If you leave the Int2 field to show zero, the timer signals only the Int1

interval.

5. Set the minutes with the arrow buttons and press

Suunto. The seconds field is

activated.

6. Set the seconds with the arrow buttons and press

Suunto. The timer is now set.

7. The timer starts when you start the stopwatch with

Start. You can also start the timer

when stopwatch is running. Then the Int1 starts from the moment when you set the

timer status from off to on and confirm it by pressing Suunto.