Schaub Lorenz SLD WE6800 Нержавеющая сталь Инструкция по эксплуатации онлайн [19/20] 299848

INFORMATION ABOUT MAINTENANCE

Section 7-1

Plug out the product, or turn off the power switch, or loosen or turn off the safety fuse supplying the chimney hood,

before starting maintenance operation.

Aluminum Filter

This filter is used to catch the oil particles in the air and, thus, it will be blocked after a period of time which will

change depending on the frequency of use of the device. We recommend that this filter is cleaned once a month at

most to make sure that the device does not pose a danger. For this operation, firstly, remove the aluminum filter.

Wash the filters with liquid washing agent and flush, and mount it on its place after drying. The change in color may

be observed as the aluminum filters are washed. This is normal and there is no need to replace the filters. It is also

possible to wash the aluminum filter in the dishwashing machine.

Removing Aluminum Filter

1. Push the lock of the aluminum filter forward.

2. Then, slightly lower it downwards and push forward. Otherwise, the filter can be defected. Wash the

aluminum filter and mount it again into its place by applying the steps mentioned above in reverse.

Carbon filter (it is for flueless use)

This filter removes the cooking smell. It cleans the circulating air within the kitchen in case there is no possibility to

use chimney. Physical life of the carbon filter of the device will expire depending on the frequency of use and mode

of cooking, and that of aluminum filter will expire depending on the cleaning regularly.

In usual use, it should be replaced once in every 4 months at most.

Removing Carbon Filter:

1. Remove the aluminum filter.

2. To remove the carbon filter, turn it to the left and pull it towards yourself.

3. Mount a new carbon filter.

4. Mount the aluminum filters.

Section 7-2

Use soft cloth wetted with water to clean the exterior surface of the chimney hood. Never use abrasive and

scratching products for cleaning. The cloth must be applied in the same direction with the brush in order to avoid

scratching of the steel drum. The bulb glasses must not be removed during cleaning.