Schaub Lorenz SLK MY6SC1 Черный Инструкция по эксплуатации онлайн [31/48] 302299

The electrical connection of this hob should be carried out by an

authorised service personal or a qualified electrician, according to the

instructions in this guide and in compliance with the current regulations.

· Before connecting your appliance to the mains at home, make sure to

check the conformity of voltage settings, which are specified on the information

sticker attached to the appliance and/or packaking, with the usage conditions

available.

· The laws, ordinances, directives and standards in force in the country of

use are to be followed (safety regulations, proper recycling in accordance

with the regulations, etc.)

Locating your built-in hob

After removing the packaging material from the appliance and its accessories,

ensure that the hob is not damaged. If you suspect any damage, do not use

the appliance and contact an authorised service personal or a qualified

electrician immediately.

This built-in hob is to be inserted into a cut out of a worktop.

INSTALLATION

· Create an opening with the dimensions shown in next picture. The distance

between the rear edge of the hob and any adjacent wall is depend on wall

surface. Please don’t use easily combustible material like curtain, paper at

nearby hob.

During usage

- Do not put flammable or combustible materials, in or near the appliance when it is operating.

- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on condition of

extreme heating. Never pour water on to flames that are caused by oil. Cover the saucepan or frypan

with its cover in order to choke the flame that has occured in this case and turn the cooker off.

- Always position pans over the centre of the cooking zone, and turn the handles to a safe position so

they cannot be knocked or grabbed.

- If you will not use the appliance for a long time, plug it of

f. Keep the main control switch off. Also when

you do not use the appliance, keep the gas valve off.

- Make sure the appliance control knobs are always in the "0" (stop) position when it is not used.

During cleaning and maintenance

- Always turn the appliance off before operations such as cleaning or maintenance. You can do it after

plugging the appliance off or turning the main switches off.

- Do not remove the control knobs to clean the control panel.

TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND YOU

ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICE AGENTS

IN CASE OF NEED.