Kaiser KCT 6912 F Mond Серый Инструкция по эксплуатации онлайн [28/72] 302829

Automatic power OFF function (operating time

limitation)

Dependent on the selected setting, every cooking

zone will be switched-OFF after a defined maximum

operation time if no operation of the assigned cooking

zone follows within this time period.

Every change of the cooking zone condition (by

means of (+) 1, (-) 2 or dual-circuit 3 key for the

respective cooking zone) puts back the maximum

operation time of this cooking zone to the initial value

of the operating time limitation.

Protection against unintended switching on

If the electronic control realizes a continuous

operation of keys for approx. 10 seconds, it switches

OFF automatically. The control sends out an audible

failure signal for 10 seconds, so that the user can

remove the object which has been mistakingly placed

onto the operation surface.

The displays show the failure code “E R 0 3“. If the

failure carries on for more than 10 seconds, only the

code “E R 0 3“ will be displayed as long as the failure

will be recognized by the electronic control. If the

cooking zone is in the “hot” status, “H“ will appear on

the display in alteration with the failure notice.

If no cooking zone will be activated within 20 seconds

after switching-on by means of the Power-key 4, the

control switches back from the ON-condition into the

stand-by-mode.

When the control is switched-on the ON/OFF-key has

priority over all other keys, so that the control can be

switched-OFF anytime, even in case of multiple or

continous operation of keys.·

In the stand-by mode a continous operation will not be

signalized.

However, before the electronic control can be

switched-ON again.

It has to recognize that all keys are not operated.