Kaiser KCT 6912 F Mond Серый Инструкция по эксплуатации онлайн [36/72] 302829

Timer as countdown timer

If the control is OFF the standalone-timer can be

operated by activating the timer key 1.

The timer display shows “00”.

x Operation of the Power-key 2 puts the control

back into the stand-by mode and the stand-

alone-timer will be cut-off.

x Adjustment range (0-99min), it can be set in 1-

minute steps with any key (+) 3, starting at 1

up to 99 (end stop) with the minus-key (-) 4

starting at 99 down to 0 (end stop).

x Continuous activation of the (+) or (-) key

results in a dynamic increase of the

adjustment speed up to maximum value

without sound signal.

When the (+) or (-) key is released in the meantime,

the adjustment speed starts again from a (low) initial

value.

Adjustment can be made with a continously activated

(+) or (-) key or by tip-operation (with sound signal)

After the timer is set the time runs down according to

the adjustment.

When the time is over there is a sound signal and the

timer display blinks.

The sound signal will be stopped automatically after 2

minutes and/or by operating any key.

Then the blinking of the timer display stops and the

display extinguishes.