Hama Т-350 Инструкция по эксплуатации онлайн [5/63] 304713

5. Installation

Youcan either stand the thermometer on an even surface using the fold-out stand

(9) on the back of the device, or attach it to awall using the opening (8) on the back

of the device.

Note

•Inorder to measurethe temperatureoutside, the outdoor sensor (7) must be

located outside of the building.

•Ensurethat the outdoor sensor is protected from direct sunlight and rain.

•Note that the maximum distance between the thermometer and the outdoor

sensor (7) is approximately 150 cm due to the length of the cable. Forthis

reason, we recommend placing the thermometer near awindow or adoor.

•Ensurethat the outdoor sensor cable is not bent, placed on sharp edges or

otherwise damaged.

Warning

Beforemounting, check that the wall you have chosen is suitable for the weight

to be mounted Also make surethat thereare no electric, water,gas or other lines

running through the wall at the mounting site.

6. Operation

•Ifyou do not change the settings, the thermometer is set in the factory to display

the current outdoor and indoor temperatureonthe display (1/2).

•The thermometer automatically stores the maximum and minimum values for the

outside temperatureand inside temperature.

•Press the MAX/MIN button for outdoor temperature(3) / MAX/MIN button

for indoor temperature(5) to display the maximum outdoor temperature/indoor

temperaturesince the last start/reset.

•Press the MAX/MIN button for outdoor temperature(3) / MAX/MIN button for

indoor temperature(5) again to display the minimum outdoor temperature/indoor

temperaturesince the last start/reset.