Proform 475 ZLE (PFEVEX23935) Инструкция по эксплуатации онлайн [12/24] 317351

13. Remove and discard the wire tie on the Main

Wire (32).

Have a second person hold the Console (30)

near the Upright (2).

Connect the wires on the Console (30) to the

Main Wire (32) and to the Pulse Wire (31).

Insert the excess wire into the Upright (2).

Tip: Avoid pinching the wires. Attach the

Console (30) to the Upright (2) with four M4 x

16mm Screws (56).

See step 5. Tighten the M10 x 53mm Screw

(73), the M10 x 20mm Screw (74), and the

M10 x 60mm Bolt (72).

See step 7. Tighten the M8 x 38mm Bolts (59).

14. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be

included. Place a mat beneath the elliptical to protect the floor.

Avoid pinching

the wires