Proform 475 ZLE (PFEVEX23935) Инструкция по эксплуатации онлайн [7/24] 317351

Wire

Tie

Wire Tie

3. With the help of a second person, place some of

the packing materials (not shown) under the rear

of the Frame (1).

Attach the Track (11) to the Frame (1) with four

M10 x 20mm Screws (74), two M10 x 38mm

Screws (75), and six M10 Washers (64) as

shown; start all six Screws, and then tighten

them.

Remove the packing materials from under the

Frame (1).

4. Have a second person hold the Upright (2) near

the Frame (1).

Locate the wire tie in the Upright (2). Tie the

lower end of the wire tie to the Main Wire (32).

Then, pull the upper end of the wire tie until the

Main Wire is routed through the Upright.

Tip: Secure the Main Wire (32) to the Upright

(2) with the wire tie to prevent it from falling

into the Upright.