Home
Главная
Rothenberger
Прочистное оборудование
R 650 72680
Инструкция по эксплуатации Страница: 20

Rothenberger R 650 72680 Инструкция по эксплуатации онлайн [20/180] 328193

ENGLISH12

clean and free of oil and grease.

15 Pull the plug from the socket. When not using the electric tool, before maintenance or

when changing tools, such as saw blades, drills and cutting bits.

16 Do not leave any tool keys inserted. Before switching on, check to see that keys and

adjustment tools have been removed.

17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is

turned off.

18 Use outdoor extension cords. When outdoors, use only extension cords that are approved

and appropriately marked.

19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric

tool when you are distracted.

20 Check the electric tool for damage. Before using the electric tool, you must inspect safety

equipment or slightly damaged parts carefully to ensure that they work properly and as in-

tended. Check to see that the moving parts operate freely and don’t stick, and to make sure

no parts are damaged. All parts must be mounted properly and meet all the conditions for

ensuring trouble-free operation of the electric tool.

Damaged safety equipment and parts must be properly repaired or replaced by a professional

facility, unless otherwise indicated in the user manual. Damaged switches must be replaced

by a customer service facility.

Never use an electric tool whose switch cannot be turned on and off.

21 Caution. Using other insertion tools and accessories may cause injury.

22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety

requirements. Repairs must be made only by an electrical expert using original replacement

parts. Otherwise accidents many occur.

1.2 Special safety instructions

- Only guide the spirals using a suitable riveting glove (model no. 72120 on the left; model no.

72121 on the right). Do not continue to use a damaged rivet glove. (A rivet glove is not perso-

nal safety equipment according to 89/686/EWG - see also 6.6)

- When using the rivet glove, make absolutely sure also to wear a disposable latex glove under

the rivet glove for hygienic reasons. (Do not continue using a damaged latex glove.)

- Wear rubber boots (for insulation) when performing cleaning work.

- The spirals must be removed completely from the holding cage before machine is turned on.

- Before inserting the plug into the electrical socket, make absolutely sure that the pipe cleaning

machine is switched to 0 or OFF.

- Whenever using electrical devices, always observe the speciﬁed voltage and generally work with

a protective tube and safety gloves.

- Choose the right tool for the clog and for the pipe diameter to be cleaned, in order to prevent

the tool from hooking into the clog and the spiral from ejecting from the pipe.

- To prevent damage, use this machine and its accessories only to clean waste water pipes — ne-

ver chimneys, wells, etc.

- To prevent damage to the pipes or pipe bends, do not modify tools by whetting them, etc.

- Use a camera system to spot the cause of the pipe clog.

1.3 Residual risks

Even when observing all of the safety instructions there are still some residual risks remaining, for

example: spirals can overturn (create a loop if the operating arc is too large) thereby creating the

risk of clamping. Spirals under tension can spring out of the pipe ~ a risk of injury.

Rothenberger R 650 72680 Инструкция по эксплуатации онлайн [20/180] 328193

Содержание

Похожие устройства