Hotpoint-Ariston AVTF 109 Инструкция по эксплуатации онлайн [14/72] 38409
![Hotpoint-Ariston AVTF 109 Инструкция по эксплуатации онлайн [14/72] 38409](/views2/1041577/page14/bge.png)
14
GB
Keep this instruction manual in a safe place for
future reference. Should the appliance be sold,
transferred or moved, make sure the instruction
manual accompanies the washing machine to inform
the new owner as to its operation and features.
Read these instructions carefully: they contain vital
information on installation, use and safety.
Unpacking and levelling
Unpacking
1. Unpack the washing
machine.
2. Check whether the
washing machine has
been damaged during
transport. If this is the
case, do not install it
and contact your
retailer.
3. Remove the four
protective screws and
the rubber washer with
the respective spacer,
situated on the rear of
the appliance (see
figure).
4. Seal the gaps using the plastic plugs provided.
5. Keep all the parts: you will need them again if the
washing machine needs to be moved to another
location.
Warning: should the screws be re-used, make sure
you fasten the shorter ones at the top.
Packaging materials are not children's toys.
Levelling
1. Install the washing machine on a flat sturdy floor,
without resting it up against walls, furniture cabinets
or other.
2. If the floor is not
perfectly level, compen-
sate for any unevenness
by tightening or
loosening the adjustable
front feet (see figure); the
angle of inclination,
measured according to
the worktop, must not
exceed 2°.
Levelling your appliance correctly will provide it with
stability and avoid any vibrations, noise and shifting
during operation. If it is placed on a fitted or loose
carpet, adjust the feet in such a way as to allow
enough room for ventilation beneath the washing
machine.
Putting your appliance in place and moving it.
If your washing machine
is equipped with a
special set of retractable
wheels you can easy
move it. To lower the
wheels and thus move
the appliance effortlessly,
just pull the lever,
situated on the left-hand
side beneath the base.
Once the appliance is in
the required position, put the lever back in place.
The washing machine is now firmly in place (see
figure).
Electric and water connections
Connecting the water inlet hose
1. Insert seal A into the
end of the inlet hose and
screw the latter onto a
cold water tap with a 3/
4 gas threaded mouth
(see figure).
Before making the
connection, allow the
water to run freely until it
is perfectly clear.
2. Connect the other end
of the water inlet hose to
the washing machine,
screwing it onto the
appliance's cold water
inlet, situated on the top
right-hand side on the
rear of the appliance
(see figure).
3. Make sure there are
no kinks or bends in the
hose.
The water pressure at the tap must be within the
values indicated in the Technical details table
(on the next page).
If the water inlet hose is not long enough, contact
a specialist store or an authorised serviceman.
Installation
A
Содержание
Похожие устройства
- Dialog WC-30U Black-Blue Инструкция по эксплуатации
- Sony KDL-22CX32D Инструкция по эксплуатации
- Scarlett IS-MC412S01 Инструкция по эксплуатации
- Shindo COLUMBA sensor 60 SS/G 3ETC Инструкция по эксплуатации
- Panasonic TC-21D2 Инструкция по эксплуатации
- Sony KDL-22E5300 Инструкция по эксплуатации
- Dialog WC-30U Black-Red Инструкция по эксплуатации
- Scarlett SC-411 Инструкция по эксплуатации
- Shindo LEDA sensor 60 B/BG 4 ET Инструкция по эксплуатации
- Panasonic KX-FT904RU Инструкция по эксплуатации
- Sony KDL-22E5310 Инструкция по эксплуатации
- Dialog WC-31U Black-Orange Инструкция по эксплуатации
- Moulinex MK 302E30 Инструкция по эксплуатации
- Shindo ALIOT sensor 60B/OG 3ETC Инструкция по эксплуатации
- Vestfrost BKF 285 Инструкция по эксплуатации
- Sony KDL-22BX200 Инструкция по эксплуатации
- Dialog WC-31U Black-Silver Инструкция по эксплуатации
- Moulinex MK 300E30 Инструкция по эксплуатации
- Shindo Atlas sensor60SS 3ETC Инструкция по эксплуатации
- Pioneer DV-530 Инструкция по эксплуатации
Скачать
Случайные обсуждения