Tp-Link TD-8816 Инструкция по эксплуатации онлайн [28/67] 16826

TD-8816 ADSL2+ Modem Router User Guide

The Router will work as a DHCP Server, it becomes the default gateway for DHCP client

connected to it. DHCP stands for Dynamic Host Control Protocol. The DHCP Server gives

out IP addresses when a device is booting up and request an IP address to be logged on to

the network. That device must be set as a DHCP client to obtain the IP address automatically.

By default, the DHCP Server is enabled. The DHCP address pool contains the range of the

IP address that will automatically be assigned to the clients on the network.

Figure 4-12

• Starting IP Address: Enter the starting IP address for the DHCP server's IP assignment.

Because the default IP address for the Router is 192.168.1.1, the default Start IP

Address is 192.168.1.100, and the Start IP Address must be 192.168.1.2 or greater, but

smaller than 192.168.1.254.

• IP Pool Count: The max user pool size.

• Lease Time: The length of time for the IP lease. After the dynamic IP address has

expired, the user will be automatically assigned a new dynamic IP address. The default

is 259200 seconds.

• DNS Relay: If you want to disable this feature, you just need to set both Primary and

secondary DNS IP to 0.0.0.0. If you want to use DNS relay, you can setup DNS server IP

to 192.168.1.1 on their Computer. If not, the device will perform as no DNS relay.

• Primary DNS Server: Type in your preferred DNS server.

• Secondary DNS Server: Type in your preferred DNS server.

• Current Pool Summary: Click the button, you can view the IP addresses that the DHCP

Server gives out.

)

Note:

If Use Auto Discovered DNS Server Only is selected in DNS Relay, this router will accept the

first received DNS assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s)

during the connection establishment. If Use User Discovered DNS Server Only is selected in

DNS Relay, it is necessary for you to enter the primary and optional secondary DNS server IP

addresses. After type in the address, click SAVE button to save it and invoke it.