Tp-Link TL-SC2020N Инструкция по эксплуатации онлайн [27/53] 39295

 Obtain DNS server address automatically: Select this option to obtain the address of DNS

server automatically.

 Use the following IP address: Select this option when the fixed IP address is set as the IP

address.

 IP address: Enter the IP address of the device.

 Subnet mask: Enter the subnet mask.

 Default gateway: Enter the default gateway.

 Use the following DNS server address: Select this option when you set the fixed address as

the IP address of DNS server.

 Preferred DNS server: Enter the IP address of the Preferred DNS server.

 Alternate DNS Server: Enter the IP address of the Alternate DNS Server, if necessary.

 HTTP Port Number: Select 80 in general situations. If you want to use a port number other

than 80, select the text box and enter a port number between 1124 and 65534.

When you have set the HTTP port number to a number other than 80 on the Network setting page

or in the Setup Program, access the device by typing the IP address of the device on the web

browser as follows: for example, when HTTP port number is set to 2000 and the IP address of

your camera is set to 192.168.1.100, you should type in http://192.168.1.100:2000

to access the

device.

5.3.2.2 PPPoE

If your ISP provides Dynamic IP with authentication by username and password, type all PPPoE

information in this part. When using the PPPoE function, you need to turn on the DDNS or IP Notification

function at same time.