Pfaff Steam ironer 560 Сервис мануал онлайн [4/66] 366039

Foreword

The purpose of this service manual is to assist you in quick and correct repair of the steam ironer.

Adjustments should only be made if the settings deviate from the requirements described herein.

When checking or adjusting the steam ironer, always proceed in the order of the worksteps prescribed.

For easier reference every workstep is marked with a dot.

The indications „left“, „right“, „top“, „bottom“, „front“ and „back“ always refer to the upright steam ironer with

the controls facing the operator.

When assembling dismantled steam ironers, adjust the steam ironer to approximately the right settings.

This facilitates the subsequent fine adjustments.

When carrying out maintenance work on live parts or in their proximity, the steam ironer is to be separated

from the power supply by unplugging the lead cord from the electrical socket.

An electrical safety test must be carried out after all repair work, even if the repair work is of a mechanical

nature.

According to the German law on safe machine operation of June 24, 1958, VDE regulations are the

recognized rules in the field of electrical engineering and form the basis for electrical safety tests of

technical appliances.

The required electrical tests for the appliances are laid down in paragraph 4 of the regulations for repair,

modification and testing of electrical appliances (VDE 0701, edition 09.2000).

It is obligatory to test our electrical appliances according to VDE 0701 following any repairs to our electrical

appliances.

Outside Germany there are similar regulations in force, which are largely identical with the requirements of

VDE 0701.

It is therefore necessary to consult a specialist when carrying out repairs on electrical appliances.

For the proper adjustment of the steam ironer, the following gauges and tools are required:

2.0 mm Allan key 07-433005-30/000

3.0 mm Allan key 07-433005-50/000

5.0 mm Allan key 07-433005-70/000

6.0 mm Allan key 07-433005-80/000

10.0 mm Allan key 07-433006-00/000

Screwdriver size 0.5 * 3.0 * 150 07-434001-60/000

Screwdriver size 1.0 * 6.0 * 100 07-434000-70/000

Philips screwdriver size 2 07-434001-20/000

13 mm socket wrench 07-433004-60/000

10 mm ring or open-ended wrench 07-433000-30/000

Pressing-out tool 92-325040-05/000

Torx screwdriver TX 6 07-434008-40/000

Torx screwdriver TX 8 07-434008-41/000

Torx screwdriver TX 10 07-434008-44/000

Torx screwdriver TX 15 07-434008-45/000