Sony 250GB + игра ModNation Racers Инструкция по эксплуатации онлайн [8/52] 40450
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Sony 250GB + игра ModNation Racers Инструкция по эксплуатации онлайн [8/52] 40450

Sony PSP-3008 Black+NFS Инструкция по эксплуатации онлайн [8/52] 245983
8
Precautions
• When placing the PSP™ system in a commercially available case,
turn off the power or put the system in sleep mode. Do not use the
system while it is in the case. Leaving the system on, or using it while
in a case or covering may cause overheating or may damage the
system.
• Put both the PSP™ system and the Remote Control in Hold Mode to
help prevent unintended operation.
Use the PSP™ system and accessories according to the instructions in
this manual. No authorisation for the analysis or modification of the
system, or the analysis and use of its circuit configurations, is provided.
Disassembling will void the system warranty and may be harmful. The
LCD screen, in particular, contains dangerous, high-voltage parts, and
the laser beam for reading UMD
®
may cause visual impairment if
exposed directly to the eyes.
When using the PSP™ system's "Scan" function to select a wireless
LAN access point, access points that are not intended for public use
may be displayed. Only connect to a personal access point that you are
authorised to use, or one that is available through a public wireless
LAN or hotspot service.
When travelling note any applicable wireless regulations.
If the PSP™ system or UMD® is brought directly from a cold location
to a warm one, moisture may condense on the lens inside the system or
on the UMD®. Should this occur, the system may not operate properly.
In this case, remove the UMD® and turn off and unplug the system. Do
not put the UMD® back in until the moisture evaporates (this may take
several hours). If the system still does not operate properly, contact the
appropriate PSP™ customer service helpline which can be found
within every PSP™ format software manual.
• Do not touch the opening on the rear of the disc (recorded surface of
the disc) with your fingers.
• Do not allow dust, sand, foreign objects or other types of dirt to get
on the disc.
• If the UMD® becomes dirty, gently wipe the exterior and recorded
surfaces of the UMD® using a soft cloth. Do not use solvents or other
chemicals.
• Do not use a UMD® that is cracked or warped or has been repaired.
The UMD® may break inside the PSP™ system, leading to injury or
malfunction.
Cases and coverings
Never disassemble the system or
accessories
Using the access point
Overseas use
Moisture condensation
UMD® handling

Похожие устройства

Скачать