Simfer F66GO42017 Инструкция по эксплуатации онлайн [3/77] 374853

Simfer F66GO42017 Инструкция по эксплуатации онлайн [3/77] 374853
INSTALLATION OF YOUR COOKER
Electrical Connection and Security:
1. Your oven requires 16 or 32 Ampere fuse according to the appliance’s power. If necessary, installation by a
qualified electrician is recommended.
2. Your oven is adjusted in compliance with 220-240V AC, 50-60 Hz. (or 230V/400V AC, 50-60 Hz.) electric
supply. If the mains are different from this specified value, contact your authorized service.
3. Electrical connection of the oven should only be made by the sockets with earth system installed in
compliance with the regulations. If there is no proper socket with earth system in the place where the oven
will be placed, immediately contact a qualified electrician. Manufacturer shall never be responsible from the
damages that will arise because of the sockets connected to the appliance with no earth system. If the ends
of the electrical connection cable are open, according to the appliance type, make a proper switch installed
in the mains by which all ends can be disconnected in case of connecting / disconnecting from / to the
mains.
4. If your electric supply cable gets defective, it should definitely be replaced by the authorized service or
qualified electricians in order to avoid from the dangers.
5. Electrical cable should not touch the hot parts of the appliance.
6. Please operate your oven in dry atmosphere.
Gas Connection and Security:
1. Fit the clamp to the hose. Push one of the hose until it goes to the end of the pipe.
2. For the sealing control; ensure that the buttons in the control panel are closed, but the gas cylinder is open.
Apply some soap bubbles to the connection. If there is gas leakage, there will be foaming in the soaped area.
3. The oven should be using a well ventilation place and should be install on flat ground.
4. Re-inspect the gas connection.
5. When placing your oven to its location, ensure that it is at the counter level. Bring it to the counter level by
adjusting the feet if necessary.
6. Do not make gas hose and electrical cable of your oven go through the heated areas, especially through the
rear side of the oven. Do not move gas connected oven. Since the forcing shall loosen the hose, gas leakage
may occur.
7. Before using the appliance, in order to ensure safe use, be sure to fix the appliance to the wall using the chain
and hooked screw supplied. Ensure that the hook is screwed into the wall securely.
8. Please use flexible hose for gas connection.

Содержание

Похожие устройства

INSTALLATION OF YOUR COOKER Electrical Connection and Security 1 Your oven requires 16 or 32 Ampere fuse according to the appliance s power If necessary installation by a qualified electrician is recommended 2 Your oven is adjusted in compliance with 220 240V AC 50 60 Hz or 230V 400V AC 50 60 Hz electric supply If the mains are different from this specified value contact your authorized service 3 Electrical connection of the oven should only be made by the sockets with earth system installed in compliance with the regulations If there is no proper socket with earth system in the place where the oven will be placed immediately contact a qualified electrician Manufacturer shall never be responsible from the damages that will arise because of the sockets connected to the appliance with no earth system If the ends of the electrical connection cable are open according to the appliance type make a proper switch installed in the mains by which all ends can be disconnected in case of connecting disconnecting from to the mains 4 If your electric supply cable gets defective it should definitely be replaced by the authorized service or qualified electricians in order to avoid from the dangers 5 Electrical cable should not touch the hot parts of the appliance 6 Please operate your oven in dry atmosphere Gas Connection and Security 1 Fit the clamp to the hose Push one of the hose until it goes to the end of the pipe 2 For the sealing control ensure that the buttons in the control panel are closed but the gas cylinder isopen Apply some soap bubbles to the connection If there is gas leakage there will be foaming in the soaped area 3 The oven should be using a well ventilation place and should be install on flat ground 4 Re inspect the gas connection 5 When placing your oven to its location ensure that it is at the counter level Bring it to the counter level by adjusting the feet if necessary 6 Do not make gas hose and electrical cable of your oven go through the heated areas especially through the rear side of the oven Do not move gas connected oven Since the forcing shall loosen the hose gas leakage may occur 7 Before using the appliance in order to ensure safe use be sure to fix the appliance to the wall using the chain and hooked screw supplied Ensure that the hook is screwed into the wall securely 8 Please use flexible hose for gas connection