Kaiser A 601 MS Инструкция по эксплуатации онлайн [8/34] 378383

Attention! The manufacturer declines all

responsibility for damage or injury if the above

instructions and normal safety precautions are

not respected

CONNECTING TO THE POWER NETWORK

Before connecting the oven to the mains power supply,

make sure that:

•The supply voltage corresponds to the

specifications on the data plate in the interior of

the device;

• The power network has an efficient ground

connection complying with all applicable laws

and regulations.

The according to the rules installed socket is

a legal

requirement. The power cable should never reach a

temperature 50° C above ambient temperature at any

point along its length.

If the appliance is to be connected directly to mains

terminals, fit a switch with minimum aperture of 3 mm

between the contacts. Make sure that the switch is

sufficient capacity for the power specified on the

appliance's data plate, and compliant with applicable

regulations. The switch must not break the yellow-

green earth wire. The socket or switch must be easily

reachable with the oven fully installed.

After connecting the device to the power supply

network (in accordance with

the requirements defined

above) it is necessary to check the lighting of the hood

and whether its motor works correctly.