Zebra ZXP 1 Руководство по драйверам Mac OS (en) онлайн [17/20] 402417

Tools

The Tools tab is used to send commands to the printer, print test cards, clean the

printer, set offsets, download rmware, and send PRN les to the printer.

• Command to send to printer: Enter an EPCL command, often with one or more

parameters, and press the Execute button to set or return information from the

printer. The printer response is shown in the Printer Status eld.

• Print test card: Select a test card, and press the Print button. Settings from

the Card Setup tab will be used (i.e., if the ribbon is YMCKO and the ribbon

combination is Front YMCO, Back K, then the test card will be printed with this

combination of panels). Included test cards are Standard, Printer Parameters,

and Encoder Parameters. (Note: Encoder parameters is not included if the printer

does not have an encoder).

• Cleaning: Select a type of cleaning, and press the Clean button. Types of

cleaning are Printer only (feeder and card path are both cleaned) and Magnetic

Encoder (only the card path is cleaned).

• Offset setting: The front and back offsets can be adjusted if the printed image is

not centered on the card. Press the Set offsets button to save the adjustments.

P1086665-001 ZXP Series 1 and 3 Mac OSX Driver User's Guide 13

Operation

Tools