Linksys WPC300N Инструкция по эксплуатации онлайн [29/65] 46315

Chapter 5: Using the Wireless Network Monitor

Create a New Profile

Wireless-N Notebook Adapter

3. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio

button if you want to connect to a wireless router or access point. Click the Ad-Hoc Mode radio button if you

want to connect to another wireless device directly without using a wireless router or access point. Enter the

Wireless Network Name for your network.

Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point.

Ad-Hoc Mode - Use this mode if you want to connect to another wireless device directly without using a

wireless router or access point.

Wireless Network Name - This is the wireless network name (SSID) that must be used for all the devices in

your wireless network. It is case- sensitive and should be a unique name to help prevent others from entering

your network.

Click the Next button to continue, or click the Back button to return to the previous screen.

4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings

screen will appear.

Network Mode - Select the Network Mode in which your wireless network will operate. In Mixed mode,

Wireless-N, Wireless-B and Wireless-G devices can operate on the same network. In Wireless-G Only mode,

no Wireless-B devices can operate in the network.

Standard Channel - Select the correct channel for your wireless network. The channel you choose should

match the channel set on the other devices in your wireless network. If you are unsure about which channel

to use, keep the default setting Auto.

Click the Next button. Click the Back button to change any settings.

Figure 5-17: Wireless Mode

Figure 5-18: Ad-Hoc Mode Settings