Fluke 2042 Инструкция по эксплуатации онлайн [23/28] 4556

• Set the receiver to automatic mode.

• Now, search or trace the conductor by means of the sig-

nal intensity (9e + 9j) displayed.When circling the recei-

ver slowly across the conductor to be searched, the dis-

play values change considerably. The display of the

maximum signal intensity is performed directly via the

conductor.

The signal intensity level decreases with increasing

distance of the fed-in signal (transmitter).

The reach will be improved when seeking the tension

If the transmitter is attached at the phase and the neutral coil directly gets lost the signal in the line

going parallellyto and back (see figure).

The range can partly lead to signal fall off when

twisting the conductors among each other. The

reach is max. 0,5 meters.

To turn the effect pointed in the upper figure off, the

connection should be carried out like the figure 18.The

backline is produced about a separate cable. The dis-

tance in in voltage-circuits will be up to 2,5 meters.

Back coils at higher distance i.e. Cabletrace (see figu-

re)

Respect sufficient distance to the conductor to be

located in order to allow an unambiguous as-

signment between the signals received and the

conductor.

Comply with the safety references when perfor-

ming connections on live circuits!

The switching with button 4 from »LEVEL I« to

»LEVEL III« the sensitvity of Distance is increased

up to a factor of 5.

▲

2 m

Fluke 2042

Users manual