![Pro-Form PERFOMANCE 400I — настройка и обслуживание беговой дорожки для оптимальной работы [27/36]](/img/pdf.png)
Pro-Form PERFOMANCE 400I — настройка и обслуживание беговой дорожки для оптимальной работы [27/36]
Превью страниц
Страница 27 /
36
![Pro-Form PERFOMANCE 400I Инструкция по эксплуатации онлайн [27/36] 458584](/views2/1565793/page27/bg1b.png)
27
Locate the Reed Switch (107) and the Magnet
(109) on the left side of the Pulley (49). Turn the
Pulley until the Magnet is aligned with the Reed
Switch. Make sure that the gap between the
Magnet and the Reed Switch is about 1/8 in. (3
mm). If necessary, loosen the #8 x 1/2" Machine
Screw (95), move the Reed Switch slightly, and
then retighten the Machine Screw. Reattach the
Motor Hood (not shown) with the #8 x 3/4" Screws
(not shown) and run the treadmill for a few minutes
to check for a correct speed reading.
SYMPTOM: The walking belt slows when walked on
a. If an extension cord is needed, use only a 3-conduc-
tor, 14-gauge (1 mm
2
) cord that is no longer than 5
ft. (1.5 m).
b. If the walking belt is overtightened, treadmill per-
formance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller screws counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walk-
ing belt is properly tightened.
c. Your treadmill features a walking belt coated with
high-performance lubricant. IMPORTANT: Never
apply silicone spray or other substances to
the walking belt or the walking platform unless
instructed to do so by an authorized service
representative. Such substances may deteriorate
the walking belt and cause excessive wear. If you
suspect that the walking belt needs more lubricant,
see the front cover of this manual.
d. If the walking belt still slows when walked on, see
the front cover of this manual.
Idler Roller Screws
2–3 in.
b
109
95
107
1/8 in.
49
Top
View
Содержание
- User s manual p.1
- Caution p.1
- Customer service p.1
- Warning decal placement p.2
- Table of contents p.2
- Warning p.3
- Important precautions p.3
- Save these instructions p.4
- Danger p.4
- Before you begin p.5
- Part identification chart p.6
- Assembly p.7
- How to use the treadmill p.17
- Gr ru hu p.17
- Danger p.17
- Etpe79816 p.18
- Etpe79816 p.19
- Etpe79816 p.23
- How to fold and move the treadmill p.25
- Maintenance and troubleshooting p.26
- Warning p.29
- Exercise guidelines p.29
- Part list p.30
- Exploded drawing a p.32
- Exploded drawing b p.33
- Model no petl79816 r1016a p.34
- Exploded drawing c p.34
- Exploded drawing d p.35
- Recycling information p.36
- Ordering replacement parts p.36
Похожие устройства
-
Pro-Form PERFORMANCE 1050 (2014)Инструкция по эксплуатации -
Pro-Form PERFORMANCE 1850Инструкция по эксплуатации -
Pro-Form PERFORMANCE 1450Инструкция по эксплуатации -
Pro-Form PERFOMANCE 600IИнструкция по эксплуатации -
Pro-Form PERFORMANCE 1050 (2015)Инструкция по эксплуатации
-
Pro-Form 730ZLTИнструкция по эксплуатации -
Pro-Form PF 5.0 ZLTИнструкция по эксплуатации -
Pro-Form 530ZLTИнструкция по эксплуатации -
Pro-Form PERFOMANCE 350IИнструкция по эксплуатации -
Pro-Form 105 CSTИнструкция по эксплуатации -
Unixfit MX-830LРуководство пользователя -
DFC VT-2300Руководство по работе с устройством
Узнайте, как правильно настроить и обслуживать беговую дорожку, чтобы избежать проблем с замедлением бегового полотна и обеспечить его долговечность.