Sinbo SK 7390 Инструкция по эксплуатации онлайн [4/10] 462609

- 3 -

• Cord storage in power base to adjust to desired length.

• AC220-240V, 50/60Hz, 1800-2200W

OPERATING YOUR KETTLE

For first time use it is recommended that you fill the kettle to the maximum level mark

with fresh tap water, boil and empty the kettle at least two times to clear the kettle of

any dust or materials from the manufacturing process. Do not drink this water.

1. Remove the kettle from the base to fill it. Press the switch at the top of the handle to

open the lid. Pour water into the kettle to the desired level,(no less than MINIMUM and

no more than MAXIMUM) press the lid shut and place the kettle back on the base un it.

CAUTION: Too little water may damage the heating element and too much water may

cause water to splatter from the kettle.

2. Connect the plug into the power outlet, turn the kettle on by pressing the ON/OFF

switch.

Ensure the kettle is positioned so the spout is facing away from you.

3. The kettle will automatically switch itself if once the water has boiled.

4. Lift the kettle from the base and pour the water into a container or cup.

5. The boiling process can be terminated at any time by lifting the kettle aif the power

base.

CAUTION: Do not lift the lid during boiling.

CARE AND CLEANING

1. Do not attempt to dismantle the kettle or power base. There are no user serviceable

parts.

For service or repair, contact an authorized electrician.

2. To prolong the kettle's life, please clean the mineral deposits in the kettle regularly.

3. Always unplug from the plug socket and allow to cool down before cleaning.

4. Do not immerse the power cord, kettle or power base in water.

5. Do not use chemicals, steel wool or abrasive cleaners to clean the outside of the kettle

as these will scratch the surface and fade the outside color.

6. Periodical descaling is required. The interval of descaling depends on the hardness

of water in your area and the frequency of using the kettle.

Cleaning Method:

1. Fill the kettle with 0.51t white vinegar and the remainder with water and allow to stand

for at least one hour.

2. Empty the solution from the kettle. Wipe the remaining deposits with a damp cloth.

3. Fill the kettle with clean water, bring to boil and then discard the water. Repeat at

least once or until no mineral deposits are left and the kettle will be ready to use.