Sinbo SVC 3497 Инструкция по эксплуатации онлайн [6/15] 462615

1. Switch off the vacuum cleaner and disconnect the plug

from the mains. To do this always pull on the plug and

not on the cable.

2. Remove the dust container.

3. Open the exhaust sponge cover.

4. Rinse the sponge filter under cold running water and

allow dry.

5. Put the exhaust air filter back into place.

6. Close the exhaust sponge cover.

Transport and Storage

1. You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift

the vacuum cleaner by the cord.

2. Befor putting the vacuum away, rewind the cord. Switch off the socket, unplug, and

press the cord rewind button until the cord is fully rewound.

3. To save space, the vacuum can be stored upright on its end cover. The telescopic tube

can be hung on the vacuum cleaner by inserting the parking fixture into the vertical

parking holder.

4. Cleaning

Clean the vacuum cleaner by wiping it with a damp cloth.

You must not use any form of strong, solvent or abrasive cleaning agent.

Environmental tips

Once any electronic product is no longer functional, it should be disposed of in such a

way as to cause minimum environmental impact, in accordance with the regulations of

your local authority. In most cases you can take such products to your local recycling

station.

Features

1. Cyclone vacuum cleaner

2. With thermostat protection

3. Speed control

4. HEPA filter

5. Metal telescopic tube

6. Metal base floor brush

7. Dust Capacity: 3 L

8. Automatic cord rewinder

9. AC230V, 50Hz, 2500W

- 5 -

Exhaust Sponge Filter