Sinbo SSI 6613 Инструкция по эксплуатации онлайн [4/14] 462626

- 3 -

Dry / Steam

You can fix the steam intensity directly by turning the steam function

“0”= steam dry =maximum steam outflow

Burst of steam

To reach a burst of steam, press the button “short burst of steam” (2).

Attention: Only, use the steam push button when the steam iron has

reached the steam or maximum temperature.

Do not press this button more than 3 times at once.

Keeping/Cleaning/Care

Switch the steam iron off (Put control-position to minimum temperature; see mark on

water tank) and unplug. Put the steam iron upright and let it completely cool down, empty

the water tank.

Remove residues from steam sole with a vinegar-water solution. Rub the cabinet with

a moisted cloth and finally rub it dry.

Automatic electricity interruption for security

In case the installed thermostat gets out of order the power supply will stop automatically

to avoid the steam iron to overheat. In this case the steam iron has to be repaired by the

service point.

ANTI-CLAC SYSTEM

A special resin filter inside the water reservoir softens the water and prevents scale

build-up in the plate

The resin filter is permanent and does not need replacing.

Please note:

Use tap water only.Distilled and/demineralised water makes the “Zero-Clac” anti-clac

system ineffective by altering its physicochemical characteristics.

Do not use chemical additives,scented substances or decalcifiers.Failure to comply with

the above-mentioned regulations to the loss guarantee.

ANTI-DRIP SYSTEM

With the anti-drip system, you ca perfectly iron even the most delicate fabrics.

Always iron these fabrics at low temperatures. The plate may cool down to the point

where no more steam comes out,but rather drops of boiling water that can leave marks

or stains.In these cases the Anti-drip system automatically activates to prevent

vaporization,so that you can iron the most delicate fabrics with out risk of spoiling or

staining them.