MPM MGO-32 Инструкция по эксплуатации онлайн [13/28] 463941

USING THE WAFFLE MAKER

CAUTION! The heat plates of the waﬄe maker become very hot during use! Touch the handle only! Do not touch

the batter ﬁll port ❼.

CAUTION! Hot steam will come out when opening the waﬄe maker.

1. Make the batter for the waﬄes.

2. Make sure that the waﬄe maker is standing with the stand ❸ extended as shown in this

manual.

3. Release the latch ❾ and open the top lid ❶. Spread butter or other edible fat thin on the the

heat plates ❽. Close the top lid.

4. Plug the waﬄe maker to a mains outlet. The red indicator lamp ❹ will go on and the waﬄe

maker will start heating up. Set the thermostat knob ❻ to MAX. This way the heat plates will

heat up faster.

5. When the waﬄe maker reaches the operating temperature, the green indicator light ❺ will

go on. Bake the waﬄes at approx. 220°C. The MIN mark on the thermostat knob is a temper-

ature of the heat plates at approx. 170°C; the MAX mark is a temperature of approx. 230°C.

6. Fill the measuring cup with the batter and pour the contents carefully into the batter ﬁll

port ❼. Be careful not to overﬁll the waﬄe maker or spill the batter. If you spill the batter

over the waﬄe maker, unplug the waﬄe maker from the mains, wait for the appliance to cool

down, and clean it thoroughly.

7. Baking the waﬄes may take from 6 to 10 minutes. When the waﬄe maker is powered on,

the indicator lamp ❺ will go on and oﬀ. This means that the waﬄe maker is periodically

heating up the plates to hold the temperature. Check the waﬄes during baking: release the

latch ❾ and carefully lift the top lid ajar. If the waﬄes require more baking, close the top lid

and secure the latch. Adjust the baking temperature according to the desired doneness and

browning of the waﬄes.

8. When the waﬄes are done, unlock and open the top lid and remove the waﬄes with a wood-

en spatula. Do not leave any baked batter residues on the heat plates, especially near the

batter ﬁll port.

CAUTION! Do not use metal or sharp cutlery as it may damage the heat plate surface!

9. Close and latch the top lid and pour in the batter if you want to make more waﬄes.

10. Once ﬁnished baking, unplug the power cord from the mains outlet and put the waﬄe mak-

er aside until it cools down completely. Next, thoroughly clean the waﬄe maker.

CLEANING AND MAINTENANCE

1. Prior to commencing the cleaning (and after ﬁnishing the roasting), pull out the plug from

the plug socket and allow the appliance to cool completely.

2. Thoroughly wipe the heating panels, clean the roaster edges using soft cloth or towel.

3. If complete removal of any food residuals from the surface of heating panels is problematic,

pour some edible onto dirty surface and try to clean after about 5 minutes. Your eﬀorts will

be successful this time.

4. Wipe the external surface of the roaster using wet cloth.

5. Measuring cup ❸ with lukewarm water and a detergent, rinse clean with water, and leave

to dry.